He means he wants to see the channel number on the infobar.
To get channel numbering on infobar, you need to enable it via Menu > Setup > System > User Interface > Settings
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
He uses a customised set of bouquets. This has been in AB 28.2 for well over 18 months and recently introduced to ABM.
The displayed/loaded number is not the same as the official LCN. He wants to see the LCN, ABM cannot do this.
Andy_Hazza (01-08-15)
Thanks Guys I think I have to go back to my old plugin settings. Thanks for your help anyway.
Sent from my iPhone using Tapatalk
You are being very vague. So progress for yourself and others is impossible.
What are you old settings?
What works on your old settings.
What are new settings?
What does not work on new settings?
Not sure what do you mean by being vague
Let me explain everything again
I am using Lraizer plugin with option of channel number & autopicon enabled & it works fine showing me actual channel number on info bar.
After reading your advice regarding SNP picons , ( which I am using at present) I followed your instructions & disabled both options from Lraizer Plugin & enabled show channel option from user interface option.Which gave me channel numbers but they were numbers like 1301,1302 etc-not the actual sky channel numbers ?
After going back to my old setting of Lraizer plugin everything is back to how it was
Sent from my iPhone using Tapatalk
Last edited by mskhan01; 02-08-15 at 08:52.
Thanks for clarifying that the issue was not with regards to picons. You wanted to view the offcial LCN instead of the number Enigma2 was using for the channel in that bouquet. That is not the actual channel number. You have the large long bouquet (in which the number loaded by Enigma2 into memory is the same as the LCN). The numbers in the bouquet will be in addition to the previous ones. When you type in a number, you jusmp to the large bouquet. If you select bouquets you will open up in that bouquet.
mskhan01 (02-08-15)