Recover STB using RS232
Instructions :
1. Install HyperTerminal
Code:
(if not exists in your PC's windows: Start****All Programs****Accessories****Commun ications****HyperTerminal)Code:-https://skydrive.live.com/?cid=b98f3d302358df4a&resid=B98F3D302358DF4A!222&id=B98F3D302358DF4A!222
2. Turn off STB
3. Connect RS232 Cable to STB and PC and execute HyperTerminal (use a null modem cable)
4.Make new connection - make name
5.Select Com port
6.Set Speed and other (115200 – 8Bit – No parity – 1 StopBit – No HW control)
7. Press space on HyperTerminal every 0.5 seconds (half a second) from the time when turn on STB,
8. When HyperTerminal shows the below picture on PC, then stop pressing space.
9. It shows to ask to select one of menu from 3 menus.
10. Select “2. Upgrade Application with Xmodem”
11.. Select menu->Transfer->Send File in HyperTerminal
12. Set protocol Xmodem and select “navi_s_326su.flash.gz.gro.s tp” and press Send button