1080i VuSolo

[Bazzer]

Anyone got around the issue with build 150, Apollo with regards to every time I select 1080i my screen goes blank. Will only work on 720.
Thanks

[Andy_Hazza]

Is it an issue? My bro has a Vu+ Solo and uses 1080i and no issues.

[Larry-G]

Is it an issue? My bro has a Vu+ Solo and uses 1080i and no issues.

Not a issue as far as I know, more likely the op's TV it self and not the image / receiver.

[cactikid]

dam i had a similar issue unsure what build and could only use 720 also on a solo,all my boxes are set to 1080
and my new tm is set to 1080 on same tv

[Bazzer]

Its just that since I have updated the Vu+ Solo I can only get 720 and when I select 1080i on the Vu the tv screen goes blank then I have to restart the Vu to get my channels back.

[Bazzer]

Is it an issue? My bro has a Vu+ Solo and uses 1080i and no issues.

Andy can you let me know which Build he is using please.
Thanks

[Andy_Hazza]

Andy can you let me know which Build he is using please.
Thanks

Hi Bazzer I can confirm this is an issue. My brother does online updates and has kept his box up-to-date that way n 1080i option was still ok.
I did a fresh usb flash with no restore and selecting the 1080i option just leaves a black screen and I had to turn box off n back on to get the option back up.
I tried both on his Toshiba n Sony tv's with same results, so obviously a bug that has crept in.

[mann]

Hi I had a similar issue on my solose box..it would only display certain channels and only a few
I could not work it out rebooting fixed issue for a few seconds then off again... till in the end I fresh flashed latest Vix image and clean set up and all became good..
I did couch flash 150 and restored a new backup prior to issues so maybe this was my cause...

[Bazzer]

Thanks Andy,
I am going to try Build 146 which I am on the understanding that this build will allow me to get the 1080i back . I will let you know how I get on and once again many thanks for your help.

[Bazzer]

Another one is .. I have a Seagate Expansion 1TB drive and a 16gb 100 G3 DataTraveler USB and both will not flash on the Vu Solo. I have tried to set up Swop Manager but it will just not have it on both. Anybody suggest a cheap USB that will work on my Solo.
Thanks

[Andy_Hazza]

Another one is .. I have a Seagate Expansion 1TB drive and a 16gb 100 G3 DataTraveler USB and both will not flash on the Vu Solo. I have tried to set up Swop Manager but it will just not have it on both. Anybody suggest a cheap USB that will work on my Solo.
Thanks

Does your Seagate drive have a power source? Have you formatted on a pc first then connected to Vu+ Solo n Initialised the drive via Storage Devices n then I always mount it via blue button n ViX n mount manager?

When you've done that try setting up your swap file via blue button, ViX Swap Manager and go with the 256mb option. Then yellow button to auto start n green button to activate and should be sorted!! Hopefully anyhow!!

[cactikid]

you dont flash boxes with hdd,use an 8gb usb on all my vu boxes,kingston,integral,and cruzer format to fat 32 first.

[Bazzer]

Thanks Andy
Done it m8 thank you for all your help works after I initialised
Bazzer

[Bazzer]

Still no 1080i I give up , I was hoping after updating to image 152 it might fix the issue but no it will still only work on 720.

[shadows]

the last build i got to work with 1080 was 126 i had hoped it would have been sorted my now but no such luck