Anyone got around the issue with build 150, Apollo with regards to every time I select 1080i my screen goes blank. Will only work on 720.
Thanks
Anyone got around the issue with build 150, Apollo with regards to every time I select 1080i my screen goes blank. Will only work on 720.
Thanks
Is it an issue? My bro has a Vu+ Solo and uses 1080i and no issues.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
dam i had a similar issue unsure what build and could only use 720 also on a solo,all my boxes are set to 1080
and my new tm is set to 1080 on same tv
Its just that since I have updated the Vu+ Solo I can only get 720 and when I select 1080i on the Vu the tv screen goes blank then I have to restart the Vu to get my channels back.
Hi Bazzer I can confirm this is an issue. My brother does online updates and has kept his box up-to-date that way n 1080i option was still ok.
I did a fresh usb flash with no restore and selecting the 1080i option just leaves a black screen and I had to turn box off n back on to get the option back up.
I tried both on his Toshiba n Sony tv's with same results, so obviously a bug that has crept in.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Hi I had a similar issue on my solose box..it would only display certain channels and only a few
I could not work it out rebooting fixed issue for a few seconds then off again... till in the end I fresh flashed latest Vix image and clean set up and all became good..
I did couch flash 150 and restored a new backup prior to issues so maybe this was my cause...
Thanks Andy,
I am going to try Build 146 which I am on the understanding that this build will allow me to get the 1080i back . I will let you know how I get on and once again many thanks for your help.
Another one is .. I have a Seagate Expansion 1TB drive and a 16gb 100 G3 DataTraveler USB and both will not flash on the Vu Solo. I have tried to set up Swop Manager but it will just not have it on both. Anybody suggest a cheap USB that will work on my Solo.
Thanks
Does your Seagate drive have a power source? Have you formatted on a pc first then connected to Vu+ Solo n Initialised the drive via Storage Devices n then I always mount it via blue button n ViX n mount manager?
When you've done that try setting up your swap file via blue button, ViX Swap Manager and go with the 256mb option. Then yellow button to auto start n green button to activate and should be sorted!! Hopefully anyhow!!
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
you dont flash boxes with hdd,use an 8gb usb on all my vu boxes,kingston,integral,and cruzer format to fat 32 first.
Thanks Andy
Done it m8 thank you for all your help works after I initialised
Bazzer
Andy_Hazza (01-03-15)
Still no 1080i I give up , I was hoping after updating to image 152 it might fix the issue but no it will still only work on 720.
the last build i got to work with 1080 was 126 i had hoped it would have been sorted my now but no such luck