Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 3 of 27 FirstFirst 1234513 ... LastLast
Results 31 to 45 of 393

Thread: Some ideas to improve the Graphical EPG screen

  1. #31

    Title
    Member
    Join Date
    Feb 2015
    Posts
    82
    Thanks
    10
    Thanked 54 Times in 25 Posts
    Quote Originally Posted by bbbuk View Post
    Yes, I also think it's a good idea. I would like to do what @matt007 has done and use two of the coloured buttons when viewing the EPG to be used for the +/- 24hrs instead of having to use channel +/-.

    @Matt007, is it easy to re-map green and yellow buttons whilst viewing the EPG to be used for +24 hrs and -24 hrs respectively?

    Is there anyway to also then re-map channel +/- to page up/down instead?
    I'll write up a quick guide if I get some time tonight hopefully

  2. The Following User Says Thank You to matt007 For This Useful Post:

    bbbuk (13-02-15)

  3. #32

    Title
    Member
    Join Date
    Feb 2015
    Posts
    82
    Thanks
    10
    Thanked 54 Times in 25 Posts
    Just a quick update. I have managed to make ch +/- buttons to jump up/down a page. So will post a guide for mapping the colours to +/-24hrs and and channel +/- buttons to page up/down

  4. The Following User Says Thank You to matt007 For This Useful Post:

    bbbuk (13-02-15)

  5. #33
    TK4|2|1's Avatar
    Title
    Senior Member
    Join Date
    May 2011
    Location
    If there's a bright centre to the universe, I'm from the planet that is farthest from.
    Posts
    940
    Thanks
    228
    Thanked 180 Times in 159 Posts
    Won't all the changes get reverted with an image update?


    Sent by pressing the screen on 1 of my Apple devices, cuz that's how I roll.

  6. #34

    Title
    Moderator
    Join Date
    Jul 2010
    Posts
    4,684
    Thanks
    1,205
    Thanked 2,524 Times in 1,349 Posts
    they surely will!
    Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
    Vu Solo4K, OpenViX 5.0, 8xdvb-s2
    Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
    Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB

  7. #35

    Title
    Member
    Join Date
    Feb 2015
    Posts
    82
    Thanks
    10
    Thanked 54 Times in 25 Posts
    Yep! But if people can know how to map them then its not a big deal re doing

  8. #36

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2014
    Posts
    1,321
    Thanks
    614
    Thanked 418 Times in 270 Posts
    Quote Originally Posted by matt007 View Post
    Yep! But if people can know how to map them then its not a big deal re doing
    Not for me as I could copy the keymap.xml file back over again from a copy I would keep on laptop (I do something similar now with the autotimers). I try to avoid doing setting restore when updating.

    I assume the file is in "/usr/share/engima2/"

    I'm not certain what section I alter as there are obviously a few sections in that xml file.

    Does the label for the key automatically change or is that hard-coded within another .py(o) file?

  9. #37

    Title
    Member
    Join Date
    Feb 2015
    Posts
    82
    Thanks
    10
    Thanked 54 Times in 25 Posts
    The changes I made are to do with the relevant python file and not the keymap.xml. But if you can code then its just a case of copying and pasting the relevant code into your relevant python file - assuming a new image doesnt change the structure of the file. If you are not keen on coding then I can send you my file with instructions on how to get it working. Im not sure if I should mess about with the keymap.xml file seeing as I have got it to work by hard coding within a python file. Is this a bad thing?

  10. #38

    Title
    ViX Beta Tester
    Join Date
    Jan 2011
    Posts
    14,099
    Thanks
    3,389
    Thanked 4,102 Times in 3,198 Posts
    You could also add any modded files to the backup manager so they're restored after an update.
    Best to post your changes though so they can be added to the image if done correctly.

  11. #39
    birdman's Avatar
    Title
    Moderator
    Join Date
    Sep 2014
    Location
    Hitchin, UK
    Posts
    7,858
    Thanks
    239
    Thanked 1,673 Times in 1,318 Posts
    Quote Originally Posted by judge View Post
    You could also add any modded files to the backup manager so they're restored after an update.
    Which could cause a problem if the "official" file gets updated.
    Better to keep your own copy and check for any changes in the git master before re-installing your fix.
    MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD

  12. #40
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,937 Times in 12,378 Posts
    Quote Originally Posted by birdman View Post
    Which could cause a problem if the "official" file gets updated.
    Better to keep your own copy and check for any changes in the git master before re-installing your fix.
    Many of the images default files can be overridden with a user file placed in /etc/enigma2/ including skin alterations, I cant go into specifics as I am not that familiar with the process but I can give a example.

    The image comes with a default satellites.xml file located in /etc/tuxbox/ this file is frequently updated as part of the image update process. however if you place a satellites.xml file into the /etc/enigma2/ directory the image will default to this file and while the master file will still be updated with a image update, the user file you placed in /etc/enigma2/ will not. If at a later date you choose to use the default file again, just delete the user file and reboot the receiver.

    As I said the same is true for skin modifications but I am not 100 percent sure of the format needed for those files.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  13. The Following 2 Users Say Thank You to Larry-G For This Useful Post:

    matt007 (14-02-15),TK4|2|1 (14-02-15)

  14. #41
    markus625's Avatar
    Title
    ViX Beta Tester
    Join Date
    Dec 2011
    Posts
    1,104
    Thanks
    208
    Thanked 711 Times in 266 Posts
    Going back to the original idea of having access to the recordings via the red button etc is this sonething that can be agreed upon for the Vix image or are we going to get into modding python files which could end up with broken images .

  15. #42

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2014
    Posts
    1,321
    Thanks
    614
    Thanked 418 Times in 270 Posts
    Quote Originally Posted by markus625 View Post
    Going back to the original idea of having access to the recordings via the red button etc is this sonething that can be agreed upon for the Vix image or are we going to get into modding python files which could end up with broken images .
    Although my Solo2 has a dedicated EPG button I use Button Setup (within menus) to assign graphical mutliEPG (I think it's called) to the red button.

    Could it not be possible to allow more control over what the coloured buttons do whilst displaying the EPG from within a new menu system or incorporated within Button Setup menu?

    This would allow full control over all 4 buttons.

    Obviously this, ideally, would need to be incorporated into the image itself rather than having to keep modding files.

    This is just my thought.

  16. #43

    Title
    Forum Supporter
    Donated Member
    Join Date
    Jun 2014
    Posts
    1,321
    Thanks
    614
    Thanked 418 Times in 270 Posts
    Quote Originally Posted by matt007 View Post
    The changes I made are to do with the relevant python file and not the keymap.xml. But if you can code then its just a case of copying and pasting the relevant code into your relevant python file - assuming a new image doesnt change the structure of the file. If you are not keen on coding then I can send you my file with instructions on how to get it working. Im not sure if I should mess about with the keymap.xml file seeing as I have got it to work by hard coding within a python file. Is this a bad thing?
    I have experience with coding but not python (more VB and VBA) but I noticed the structure of python is a little similar to that of VB/VBA.

    If you can point me in the direction of which file (and where it's stored) I need to edit and I shall take a look and see if I can work it out.

    I realise any update will overwrite this file or files but I shall just keep a copy of file(s) on my laptop and copy it back again after an update.

  17. #44

    Title
    Moderator
    Join Date
    Jul 2010
    Posts
    4,684
    Thanks
    1,205
    Thanked 2,524 Times in 1,349 Posts
    Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
    Vu Solo4K, OpenViX 5.0, 8xdvb-s2
    Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
    Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB

  18. The Following User Says Thank You to rossi2000 For This Useful Post:

    bbbuk (15-02-15)

  19. #45

    Title
    Member
    Join Date
    Feb 2015
    Posts
    82
    Thanks
    10
    Thanked 54 Times in 25 Posts
    The colour buttons can be programmed and labelled in the EpgSelection.py file. If you want the buttons to be different for just the graphical EPG and remain same for other EPGs then just add an If statement to check if self.type ==EPG_TYPE_GRAPH and add the new button mapping code within that statement (linking each button action to the relevant method). If you need more help then just give me a shout.

    If I am home this weekend then I will share my code/file for everyone to use. I have managed to make the following changes:

    Red button: popup with extra options such as IMDb serch, EPG serch, add timer/auto timer
    Green button: shows recordings (movie list)
    Green button long press: shows timer list
    Yellow button: -24hrs
    Blue button: +24hrs
    Ch+: page up
    Ch-: page down.
    Last edited by matt007; 26-02-15 at 22:47.

  20. The Following 4 Users Say Thank You to matt007 For This Useful Post:

    abu baniaz (02-09-19),bbbuk (26-02-15),rossi2000 (27-02-15),TK4|2|1 (27-02-15)

Page 3 of 27 FirstFirst 1234513 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.