WOW!
Code:
TV-Mode setup
With the Dreambox remote control you have the possibility to control the dreambox and your tv device
with only one remote control. In order that your tv device reacts to the signals of the remote control, you
have to program it before. Therefore a 3-digit Code from our tv code list has to be chosen and entered.
The most recent device list can be found in the download center on our website.
www dreambox de
Programming the remote control
1.
Press the
TV-Mode-Button
once.
2.
Press the
SHIFT/Setup-Button
for 3 seconds, the
TV-Mode-Button
will flash twice.
3.
Use the
Numeric-Keypad
to enter the 3-digit Code into the remote control. The TV-Mode-Button
will flash once for every digit you enter. Once you have entered the 3rd digit the TV-Mode-Button
will flash twice. The remote control exits the programming mode automatically.
If no code is entered within 10 seconds the remote control will exit the programming mode automati-
cally.
4.
Now press the Mute- or Volume Button in order to check if the tv device responds to the just entered
code. If there is no response, please try it with the next code from the list, according to the steps
above.