I have just swapped the tuners over again so the fixes dish is a & the motorised dish in b still the same
I have just swapped the tuners over again so the fixes dish is a & the motorised dish in b still the same
Sorry to ask again, you are definitely using the cable to the motor, not the one direct to lnb on motorised dish?
yes that is correct it works ok when I have the spiderbox or the duo but not with this box
Last thing I can suggest, can you try replacing the satellites.xml? Easier to transfer a new chanenl list, Vhannibals is updated regularly.
If you set up the duo excatly the same and it moves the dish successfully, then I suspect something is wrong with your hardware.
which is the best way to do this ftp with dream box edit or directly from the plugin section
Not sure how up to date the ones in the plugins are, but will serve your purpose.
If manually downloaded onto PC, normally transfer using Dreamset/Dreamboxedit.
I will give that ago
I have got both tuners working now I have the tuner connected to the fixed dish & tuner b connected to the motorised dish.
both tuners are working on 28 east ok they are both locked ok
I now have to get the box to power the motor to move the dish.
whats the best way to set this up using vix on this box
Same as you did in picture of settings above.
I will give it ago after the kids have stopped watching the Disney channel
Personanly I prefer to deal with problems in isolation. Once resolved add other variables. In your case, I would start of with get your E2 receivers to move the motorised dish.
Also, may I suggest that you draw a picture. Should look like attached, finish off with which wire is connected to which tuner. Add/dleet wires as required.
got the dish moving now so one more problem sorted just need to get the dish to lock tightened all the fittings on the motor it now moves
the dish is picking up the signal on the dish now but on the tuner has a weak signal strength & keep breaking up I have used dish pointer & got Latitude: 54.7860°
Longitude: -1.3572° but my compass on my phone is 54.4711 n 1.2125w on my iphone .
also when I am on sat finder do I have it set to predefined transponder or manual transponder
how can I enter the frequency on the position set up feature so I can get a lock on the dish & use the fine movement