Explanation of this program Dreambox 500 optiflasher + take and pass Pakab + other be

[tytus 56]

How to install the images, and explain Alpakab
Other options through Alr.s.
Wonderful

Dreambox OptiFlasher

Devices on Dreambox 500


Note
The program works for Dreambox dm 500 s
Only
And is of Arab creativity Every Thanksgiving through Yassin YASSINOV
This wonderful ...



General characteristics of the program:

- Special devices, only 500s



- Backup Pakab take a picture of the vehicle on the Dreambox
- Dreambox Reload this crude form of pictures and photos Alpakab img format yas all
- Take to the settings Pakab
- Re-installation settings (channels, files and favorites, etc. ...)
- Reconstruction of the state of Dream Factory



Benefits of the program:

- The factor of time it takes a very short
- Get rid of the problem Allampeh Green
Especially when you pass over the images pli
Photos Djimina ... and a lot

Cable guide



Network cable rj45

To download
Dreambox OptiFlasher v1.0.1

http://www.sendspace.com/file/ytgrsx


This interface program
After decompressing






For how to deal with the program



After opening the program
Put the initial settings



1 - Ebbe Dreambox
2 - user name is root
3 - normal, a bass dreambox
That has not been changed
4 - and then we press connect
Contact Baldereym




Then the connection is successfully As you can see
Underneath the picture
Of course, if the settings are correct




Now we come to explain some characteristics of the program


First

Read IMAGE Backup

A - Pakab take a picture of the composite device


For explanation of how these photographer
1 - we press the mouse on the property the first program
And to activate
2 - then put pressure on Do Job






Show us the picture as below
Choose a place to save Alpakab then we call as starch
Then we press save as you see

Note: Formula Alpakab be yas

Then we go to the place or folder that we save the Alpakab
The result ...




II.



ReadUser Data / Settings Backup



B - take a copy of the settings as channels + satellite + favorites, etc. ...



1 - do you see as the third option
2 - put pressure on Do Job
Will show us the picture as below







3 - choose the name of the image focused on any device that Snakhadd Pakab
To their settings





For example, choose Other
Because the image is used
It ...

4 - pressure to confirm





Will show us the following picture
Do the same thing as in the method of taking Alpakab
Call any file and determine where to save
Then put pressure on the save
As you can see below






Go to the place we made the conservation

Alenttejh ...

III.

Write IMAGE / Restore Backup / Recovery


C - pass the image of the device or Pakab

Very important
Must be that the picture format img
Yas and Alpakab format only


1 - do the second option as
2 - than the pressure on Do Job also points the arrow below







Then define the place of the image to be passed to the Dream






Note that the update will start
And the process is time-consuming reverse Dream program in August

Phone is being updated

Wait until the update is complete 100/1 00



And finally




- Other options

Write User Data / Settings Backup

Pass the file channels / satellites and Favorites





Mlahzha we want to pass a file Pakab Settings

Must be two images of the same name
That we take any of them Alpakab which we want to
Pass to do so Alpakab
Means of an image to pli pli
Of the image to Nmcis Nmcis .. and so on

V.

FULL FACTORY RESET

E - reset factory





Explanation finished


I hope to take advantage of all and can not do without your suggestions


N a God that will appeal to everyone

[chet9651]

thanks i will try

[Flyingpig]

Can this program be used to flash a DM500 over the network rather than dreamup? Or am I reading this wrong???

[wullboy]

Can this program be used to flash a DM500 over the network rather than dreamup? Or am I reading this wrong???

Try useing Flash ftp or even cute ftp, as they are good file transfer proggy m8 ?? and they both work on a DM500s and the answer to your question, i would think yes, it look straight forward.....

[Stanman]

Only ever flashed a dm500 once but you will also need a telnet client time to run the command. Can use windows built in one or use putty.
If your on windoze 7 you need to enable it as not done by default.

Sent from my GT-I9305 using Tapatalk 4

[Flyingpig]

Thanks Peeps!!

I am okay using telnet as I use Linux OS on my laptop, so its easy to log in to the box via telnet.

The box was working fine for a long time, but after a recent channel list update and network settings change it is playing up and keeps packin up, so its time for a reflash, and going to reflash with Commando.

Ta.

[Flyingpig]

Meant to add - I have never flashed a DM500 box any other way than Dreamup and I cant find my rs232 usb cable....

So going to FTP use Optiflasher and see how it goes. Otherwise a cable will be purchased from fleabay!!

[wullboy]

Meant to add - I have never flashed a DM500 box any other way than Dreamup and I cant find my rs232 usb cable....

So going to FTP use Optiflasher and see how it goes. Otherwise a cable will be purchased from fleabay!!

I don`t no much about optiflash, but is that for a enigma2 box, looking at it m8 from the internet photo`s,all i`m seeing is enigma2 in the prog, i`m not seeing anything that says enigma1, so check it out first before you use it ??

Once you get your head round FlashFTP, or CuteFTP, you will find no easier proggy for working within your dreambox 500s m8, I would recommend you start to get familiar with one of these software programs, they will help you a lot in the future ???

[Flyingpig]

I am okay with Cute FTP / Filezilla - no problem at all using them.

Is it literally a case of ftp'ing to my tmp folder then using the telnet command....

Ta.

[Stanman]

Yes it is mate, these are the instructions I followed

To flash an image using Telnet

This method will only work with a .img image file.

• Rename the image file to backup.img
• FTP the image file to the /tmp folder on the dreambox
• Telnet to your box and paste the following command:

Code:
cd /tmp && eraseall /dev/mtd/3 && cp backup.img /dev/mtd/3 && reboot



TRY AT YOUR OWN RISK