The following tutorial aims to show in a easy to follow tutorial how to flash your Vu+ Duo2 with the v2 bootloader.
you will need a .pdf reader to read this tutorial for which i highly recommend the free foxit pdf reader.
The following tutorial aims to show in a easy to follow tutorial how to flash your Vu+ Duo2 with the v2 bootloader.
you will need a .pdf reader to read this tutorial for which i highly recommend the free foxit pdf reader.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Revision 2.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Alanp (24-08-13),majid.209.mt (17-07-13),Sicilian (17-07-13),vmax (17-07-13)
How can I check to see which bootloader I already have?
Hi,
when you see V2 on VFD at the beginning of boot you have new one.
ciao
---
Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard
Clabs (25-07-13)
If the box is on the new bootloader you'll see 'Duo2_CFE_V2' two times in the VFD during the booting.
If you have the original bootloader you won't notice anything.
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
I get "double your expectation" logo then the other led display comes on. Then booting so must be V1. Will try update and report back. Thanx guys
When you see 'Duo2_CFE_V2' it should be fine.
And indeed: I would reflash the box after the bootloader update. I'm not sure if it's required though.
Make a settings backup and use it for restoring during the First Install Wizard. The box will be up & running again in a couple of minutes.
Make sure to flash with build 723 (and don't update online to 724 as there are some issues).
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
Alanp (24-08-13)
Thanks Rob will try it now
VU+Duo2 5.2.025
Why do I need to update the bootloader?
Vu+ Duo2, OpenVix, 3xdvb-c
Vu+ SoloSE V2, OpenVix, 1xdvb-s2 , 1xdvb-c (Sundtek)
Vu+ SoloSE V2, OpenVix, 1xdvb-c
Vu+ SoloSE, OpenVix, 1xdvb-c
ET6500. OpenVix, 1xdvb-c
Motor 1m dish
uyan (19-11-17)
To enable all functionality of your box.
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
Peterj (24-08-13)
when you say in the instructions "The bootloader only takes a few seconds to flash and once completed you will need to reflash the
receiver making sure to first format the USB stick." do you mean you have to re-install the VIX image?
yes you should reflash the image once the bootloader has been updated, if the receiver is brand new then it is very unlikely that you will need the bootloader updating as it would have been done in the factory or by your supplier.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
My box is only about 2 months old, i'll have to check when I get home, I get the message "double your expectation" is that the older version
I dont have a Duo2 on which to confirm but from information given to me you should see 'Duo2_CFE_V2' on the VFD of the receiver at bootup to signify that it has the V2 bootloader loaded.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.