Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 9 of 9

Thread: Can't flash latest 3.0 image

  1. #1
    Rimmel's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2011
    Posts
    323
    Thanks
    64
    Thanked 68 Times in 13 Posts

    Can't flash latest 3.0 image

    Hi guys my brother in law and myself have the same problem, got ET5000 boxes flashed the bootloader to latest from download section and tried flashing latest image from the downloads section [openvix-3.0.649-et5x00_usb.zip]. Flash goes ok but on reboot it gets to the blue Openvix loading screen the ViX cursor flashing on and off a few times the a black dos type screen appears with and error on it. This cycle just loops then constantly.

    Any help would be great.
    vixerror5.jpg
    Is definitely the most misspelled word on the internet?

  2. #2

    Title
    ViX Beta Tester
    Join Date
    Jan 2011
    Posts
    14,099
    Thanks
    3,389
    Thanked 4,102 Times in 3,198 Posts
    crash logs (generated by default in /home/root/logs/) are a lot easier to read rather than looking at a dodgy photo...
    anyway, looks like your ET5000 box is looking for /usr/share/enigma2/rc_models/et6x00/rcpositions.xml for some resaon & can't find it.
    Try creating/copying it to /usr/share/enigma2/rc_models/et6x00/ & see if the box boots ok while a fix is added to the image if needed.

  3. The Following User Says Thank You to judge For This Useful Post:

    Rimmel (18-04-13)

  4. #3
    Rimmel's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2011
    Posts
    323
    Thanks
    64
    Thanked 68 Times in 13 Posts
    Just checked - there is no rc_models or rc_models/et6x00 folder

    Created it and not got this error: attched enigma2_crash_1366286412.log


    Code:
    <?xml version="1.0" encoding="utf-8"?>
    <openvix>
    	<enigma2>
    		<crashdate>Thu Apr 18 13:13:54 2013</crashdate>
    		<compiledate>Apr  8 2013</compiledate>
    		<contactemail>vixlogs@world-of-satellite.com</contactemail>
    		<!-- Please email this crashlog to above address -->
    		<skin>ViX-Night-HD/skin.xml</skin>
    		<sourcedate>2013-04-08</sourcedate>
    		<version>3.0.0</version>
    	</enigma2>
    	<image>
    		<stbmodel>et5000</stbmodel>
    		<kernelversion>
    			<![CDATA[
    Linux et5x00 3.6.0 #1 SMP Sun Mar 31 22:16:15 BST 2013 mips GNU/Linux
    ]]>
    		</kernelversion>
    		<kernelcmdline> bmem=130M ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs console=ttyS0,115200n8</kernelcmdline>
    		<nimsockets>NIM Socket 0:</nimsockets>
    		<imageversion>
    			<![CDATA[
    box_type=et5x00
    build_type=0
    version=3.0
    build=649
    drivers=20121215
    date=20130408111958
    comment=ViX
    target=9
    creator=openViX
    url=http://www.xtrend-support.co.uk
    catalog=http://www.xtrend-support.co.uk
    ]]>
    		</imageversion>
    		<imageissue>
    			<![CDATA[
    Welcome to OpenViX for %h
    openvix 3.0 %h
    
    ]]>
    		</imageissue>
    	</image>
    	<software>
    		<enigma2software>
    			<![CDATA[
    enigma2 - 2.8+git13592+b629a1f-r93
    enigma2-fonts - 2010.11.14-r93
    enigma2-plugin-extensions-audiosync - git5246+1e387c0-r29
    enigma2-plugin-extensions-autotimer - git5246+1e387c0-r29
    enigma2-plugin-extensions-epgsearch - git5246+1e387c0-r29
    enigma2-plugin-extensions-imdb - git5246+1e387c0-r29
    enigma2-plugin-extensions-mediascanner - 2.8+git13592+b629a1f-r93
    enigma2-plugin-extensions-openwebif - 0.1+git503+263fe4d-r20.72
    enigma2-plugin-extensions-pictureplayer - 2.8+git13592+b629a1f-r93
    enigma2-plugin-extensions-xmltvimport - 1.0+git84+9f6e409-r29
    enigma2-plugin-extensions-xmltvimport-rytec - 1.0-r2
    enigma2-plugin-skins-vix-night-hd - 2.0+git1673+d23a473-r11
    enigma2-plugin-systemplugins-autobouquetsmaker - git333+bd2c4ad-r47
    enigma2-plugin-systemplugins-blindscan - git333+bd2c4ad-r47
    enigma2-plugin-systemplugins-crossepg - 0.6.2+git356+0853530-r6
    enigma2-plugin-systemplugins-hdmicec - 2.8+git13592+b629a1f-r93
    enigma2-plugin-systemplugins-hotplug - 2.8+git13592+b629a1f-r93
    enigma2-plugin-systemplugins-mphelp - git5246+1e387c0-r29
    enigma2-plugin-systemplugins-networkbrowser - git5246+1e387c0-r29
    enigma2-plugin-systemplugins-networkwizard - 2.8+git13592+b629a1f-r93
    enigma2-plugin-systemplugins-positionersetup - 2.8+git13592+b629a1f-r93
    enigma2-plugin-systemplugins-remotecontrolcode - git333+bd2c4ad-r47
    enigma2-plugin-systemplugins-satfinder - 2.8+git13592+b629a1f-r93
    enigma2-plugin-systemplugins-toolkit - git5246+1e387c0-r29
    enigma2-plugin-systemplugins-videoenhancement - 2.8+git13592+b629a1f-r93
    enigma2-plugin-systemplugins-videomode - 2.8+git13592+b629a1f-r93
    enigma2-plugin-systemplugins-wirelesslan - 2.8+git13592+b629a1f-r93
    enigma2-plugin-vix-core - 2.1+git522+58bffb0-r10
    enigma2-plugins - git5246+1e387c0-r29
    enigma2-skindefault - 1.0+git25+41f3b07-r14
    enigma2-spinner - 1.0-r0
    ]]>
    		</enigma2software>
    		<xtrendsoftware>
    			<![CDATA[
    et-blindscan-dvbs-utils - 1.0-r1
    et-dvb-modules-et5x00 - 3.6.0+20121215-r2
    et-fpupdate-et5x00 - 15-r4
    ]]>
    		</xtrendsoftware>
    		<gstreamersoftware>
    			<![CDATA[
    gst-plugin-dvbmediasink - 0.10.0+git16+aeeed7f-r4
    gst-plugin-subsink - 0.10.0+git5+0cb20d6-r0
    gst-plugins-bad - 0.10.23-r5
    gst-plugins-bad-cdxaparse - 0.10.23-r5
    gst-plugins-bad-mms - 0.10.23-r5
    gst-plugins-bad-mpegdemux - 0.10.23-r5
    gst-plugins-bad-rtmp - 0.10.23-r5
    gst-plugins-bad-vcdsrc - 0.10.23-r5
    gst-plugins-base - 0.10.36-r6
    gst-plugins-base-alsa - 0.10.36-r6
    gst-plugins-base-app - 0.10.36-r6
    gst-plugins-base-audioconvert - 0.10.36-r6
    gst-plugins-base-audioresample - 0.10.36-r6
    gst-plugins-base-decodebin - 0.10.36-r6
    gst-plugins-base-decodebin2 - 0.10.36-r6
    gst-plugins-base-ogg - 0.10.36-r6
    gst-plugins-base-playbin - 0.10.36-r6
    gst-plugins-base-subparse - 0.10.36-r6
    gst-plugins-base-typefindfunctions - 0.10.36-r6
    gst-plugins-base-vorbis - 0.10.36-r6
    gst-plugins-good - 0.10.31-r4
    gst-plugins-good-apetag - 0.10.31-r4
    gst-plugins-good-audioparsers - 0.10.31-r4
    gst-plugins-good-autodetect - 0.10.31-r4
    gst-plugins-good-avi - 0.10.31-r4
    gst-plugins-good-flac - 0.10.31-r4
    gst-plugins-good-flv - 0.10.31-r4
    gst-plugins-good-icydemux - 0.10.31-r4
    gst-plugins-good-id3demux - 0.10.31-r4
    gst-plugins-good-isomp4 - 0.10.31-r4
    gst-plugins-good-matroska - 0.10.31-r4
    gst-plugins-good-rtp - 0.10.31-r4
    gst-plugins-good-rtpmanager - 0.10.31-r4
    gst-plugins-good-rtsp - 0.10.31-r4
    gst-plugins-good-souphttpsrc - 0.10.31-r4
    gst-plugins-good-udp - 0.10.31-r4
    gst-plugins-good-wavparse - 0.10.31-r4
    gst-plugins-ugly - 0.10.19-r4
    gst-plugins-ugly-amrnb - 0.10.19-r4
    gst-plugins-ugly-amrwbdec - 0.10.19-r4
    gst-plugins-ugly-asf - 0.10.19-r4
    gst-plugins-ugly-cdio - 0.10.19-r4
    gst-plugins-ugly-dvdsub - 0.10.19-r4
    gst-plugins-ugly-mad - 0.10.19-r4
    gst-plugins-ugly-mpegaudioparse - 0.10.19-r4
    gst-plugins-ugly-mpegstream - 0.10.19-r4
    gstreamer - 0.10.36-r2
    ]]>
    		</gstreamersoftware>
    	</software>
    	<crashlogs>
    		<enigma2crashlog>
    			<![CDATA[
    + (1) Background File Eraser
    + (5) Tuxtxt
    + (8) graphics acceleration manager
    + (9) GFBDC
    10800k video mem
     - double buffering available!
    3600kB available for acceleration surfaces.
    resolution: 1280 x 720 x 32 (stride: 5120)
    + (9) gLCDDC
    couldn't open LCD - load lcd.ko!
    lcd buffer 0x7d62b8 8448 bytes, stride 132
    LCD resolution: 132 x 64 x 8 (stride: 132)
    + (9) Font Render Class
    [FONT] initializing lib...
    [FONT] loading fonts...
    [FONT] Intializing font cache, using max. 4MB...
    + (10) gRC
    RC thread created successfully
    + (15) eWindowStyleManager
    + (20) DVB-CI UI
    + (20) UHF Modulator
    couldnt open /dev/rfmod0!!!!
    + (20) RC Input layer
    + (20) misc options
    + (20) AVSwitch Driver
    couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
    + (21) input device driver
    Input device "dreambox remote control (native)" is a remotecontrol
    Input device "dreambox advanced remote control (native)" is a remotecontrol
    Input device "front panel" is a remotecontrol
    Found 3 input devices.
    + (22) Hdmi CEC driver
    + (30) eActionMap
    + (35) CI Slots
    scanning for common interfaces..
    eDVBCIInterfaces->setInputSource(0, 0)
    eDVBCIInterfaces->setInputSource(1, 1)
    done, found 0 common interface slots
    + (35) CA handler
    + (36) Stream server
    + (40) eServiceCenter
    settings instance.
    + (41) eServiceFactoryDVD
    + (41) eServiceFactoryM2TS
    + (41) eServiceFactoryMP3
    + (41) eServiceFactoryFS
    + (41) eServiceFactoryDVB
    reached rl 70
    ---- opening lame channel db
    reading services (version 4)
    loaded 0 services
    scanning for frontends..
    opening frontend 0
    close frontend 0
    found 1 adapter, 1 frontends(1 sim) and 7 demux, boxtype 3
    Use valid Linux Time :) (RTC?)
    [EPGC] Initialized EPGCache (wait for setCacheFile call now)
    Loading spinners...
    [ePNG] couldn't open /usr/share/enigma2/spinner/wait20.png
    found 19 spinner!
    
    setIoPrio best-effort level 3 ok
    [Harddisk] enumerating block devices...
    [Harddisk] enumerating network mounts...
    unable to load config ([Errno 2] No such file or directory: '/etc/enigma2/settings'), assuming defaults...
    Reading satellites.xml
    main thread is non-idle! display spinner!
    sec config cleared
    setSlotInfo for dvb frontend 0 to slotid 0, descr AVL2108, need rotorworkaround No, enabled Yes, DVB-S2 Yes
    slot: 0 configmode: simple
    diseqcmode:  single
    sec config completed
    [InfoBar] Failed to load resumepoints: [Errno 2] No such file or directory: '/etc/enigma2/resumepoints.pkl'
    loading bouquet... /etc/enigma2/bouquets.tv 1
    loading bouquet... /etc/enigma2/userbouquet.favourites.tv 1
    0 entries in Bouquet userbouquet.favourites.tv
    1 entries in Bouquet bouquets.tv
    loading bouquet... /etc/enigma2/bouquets.radio 1
    loading bouquet... /etc/enigma2/userbouquet.favourites.radio 1
    0 entries in Bouquet userbouquet.favourites.radio
    1 entries in Bouquet bouquets.radio
    [Time By]: Transponder
    [Ipkg] Added to OPKG destinations: /
    [FONT] adding font /usr/share/fonts/Roboto-Bold.ttf...OK (Regular)
    [FONT] adding font /usr/share/fonts/Roboto-BoldItalic.ttf...OK (Italic)
    [FONT] adding font /usr/share/fonts/Roboto-Black.ttf...OK (Bold)
    [FONT] adding font /usr/share/fonts/Roboto-BlackItalic.ttf...OK (Boldit)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
    [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
    [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
    [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
    [SKIN] loading include: /usr/share/enigma2/ViX-Common/CommonSkin.xml
    [FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
    [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
    Unknown device type: front panel
    [iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
    Activating keymap: Default (US)
    Activating language English (UK)
    --> setting scaler_sharpness to: 0000000D
    [EPGC Load] Poller disabled.
    [EPGC Save] Poller disabled.
    [EPGC] setCacheFile read/write epg data from/to '/etc/enigma2/epg.dat'
    [EPGC] time updated.. start EPG Mainloop
    [EPGC] /etc/enigma2/epg.dat not found, try /epg.dat
    couldn't open /proc/stb/misc/12V_output
    Setting OSD position:0 720 0 576
    Setting 3D mode: auto
    Setting 3D depth: 50
    Setting OSD alpha: 255
    [EPGC Save] Poller disabled.
    [EPGC Load] Poller disabled.
    FIXME: request for unknown slot
    FIXME: request for unknown slot
    FIXME: request for unknown slot
    FIXME: request for unknown slot
    --> setting contrast to: 00008000
    --> setting saturation to: 00008000
    --> setting hue to: 00008000
    --> setting brightness to: 00008000
    --> setting block_noise_reduction to: 00000000
    --> setting mosquito_noise_reduction to: 00000000
    --> setting digital_contour_removal to: 00000000
    --> setting splitmode to: off
    --> setting sharpness to: 00000000
    --> setting auto_flesh to: 00000000
    --> setting green_boost to: 00000000
    --> setting blue_boost to: 00000000
    --> setting dynamic_contrast to: 00000000
    --> applying pep values
    getModeList for port DVI-PC
    remove DVI-PC because of not existing modes
    getModeList for port YPbPr
    getModeList for port DVI
    hotplug on dvi
    -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
    -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
    -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
    -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
    setMode - port: YPbPr mode: 720p rate: multi
    -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
    [XMLTVImport] autostart (0) occured at 1366287234.24
    [AutoTimer] Auto Poll Enabled
    [SoftcamManager] AutoStart Enabled
    starting hotplug handler
    [ImageManager] AutoStart Enabled
    [ImageManager] Backup Schedule Disabled at (now=Thu 18 Apr 2013 13:13:54 IST)
    [BackupManager] AutoStart Enabled
    [BackupManager] Backup Schedule Disabled at (now=Thu 18 Apr 2013 13:13:54 IST)
    [AutoBouquetsMaker] AutoStart Enabled
    [AutoBouquetsMaker] AutoBouquetsMaker Schedule Disabled at Thu 18 Apr 2013 13:13:54 IST
    [XMLTVImport] autostart (0) occured at 1366287234.3
    [XMLTVImport] WakeUpTime now set to -1 (now=1366287234)
    ('en_GB', ('English (UK)', 'en', 'GB'))
    warning, skin is missing element wizard in <class 'Plugins.SystemPlugins.Videomode.VideoWizard.VideoWizard'>
    ++++++++++++***++**** VideoWizard-createSummary
    EXCEPTION IN PYTHON STARTUP CODE:
    ------------------------------------------------------------
    Traceback (most recent call last):
      File "/usr/lib/enigma2/python/mytest.py", line 682, in <module>
        runScreenTest()
      File "/usr/lib/enigma2/python/mytest.py", line 511, in runScreenTest
        runNextScreen(session, screensToRun)
      File "/usr/lib/enigma2/python/mytest.py", line 507, in runNextScreen
        session.openWithCallback(boundFunction(runNextScreen, session, screensToRun[1:]), screen, *args)
      File "/usr/lib/enigma2/python/mytest.py", line 322, in openWithCallback
        dlg = self.open(screen, *arguments, **kwargs)
      File "/usr/lib/enigma2/python/mytest.py", line 335, in open
        self.execBegin()
      File "/usr/lib/enigma2/python/mytest.py", line 227, in execBegin
        c.execBegin()
      File "/usr/lib/enigma2/python/Screens/Screen.py", line 98, in execBegin
      File "/usr/lib/enigma2/python/Screens/Wizard.py", line 525, in updateValues
      File "/usr/lib/enigma2/python/Screens/Wizard.py", line 452, in runCode
      File "<string>", line 3, in <module>
      File "/usr/lib/enigma2/python/Screens/Rc.py", line 69, in selectKey
    KeyError: 2
    ------------------------------------------------------------
    (exit code 5)
    getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
    getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
    getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
    ]]>
    		</enigma2crashlog>
    	</crashlogs>
    </openvix>
    thanks
    Last edited by Rimmel; 18-04-13 at 13:16.
    Is definitely the most misspelled word on the internet?

  5. #4

    Title
    ViX Beta Tester
    Join Date
    Jan 2011
    Posts
    14,099
    Thanks
    3,389
    Thanked 4,102 Times in 3,198 Posts
    looks like more files are missing, could you have flashed a corrupt download?
    try downloading it & flashing it again.
    If that fails, revert to a previous image till the build is fixed if it needs to be.
    Sorry, don't have an ET5000 to test on here...

  6. #5
    Rimmel's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2011
    Posts
    323
    Thanks
    64
    Thanked 68 Times in 13 Posts
    Do you know the telnet command to show the bootloader version? So i can verfiy it it at the right version.


    In telnet type uname -r and got back: 3.6.0

    thanks
    Last edited by Rimmel; 18-04-13 at 13:20.
    Is definitely the most misspelled word on the internet?

  7. #6
    Rimmel's Avatar
    Title
    Forum Supporter
    Donated Member
    Join Date
    Sep 2011
    Posts
    323
    Thanks
    64
    Thanked 68 Times in 13 Posts
    Been trying all day different 3.0 builds - most flash and start ok, but then most crash frequently, usually losing USB mounts etc.

    Went back to 2.4.

    thanks for the help.
    Is definitely the most misspelled word on the internet?

  8. #7
    jonc
    I was getting the same problem and had to install a earlier version

  9. #8
    andyblac's Avatar
    Title
    Administrator
    Donated Member
    Join Date
    Apr 2010
    Posts
    12,699
    Thanks
    2,607
    Thanked 11,096 Times in 4,733 Posts
    thanks, will be fixed in next build

    https://github.com/OpenViX/enigma2/c...34d196f1602c0f
    D I S C L A I M E R
    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Release notes can be found in the About screen by pressing epg/info
    Rules can be found HERE - Support our sponsor World-Of-Satellite HERE

  10. The Following 4 Users Say Thank You to andyblac For This Useful Post:

    cypchris (12-05-13),Larry-G (12-05-13)

  11. #9
    altobelli
    I have also the same problem with the latest verion, also I tried an earlier version and that is oke.
    I have that with the vix image and the hd freak image, I can't update the older version to the new one.


    Altobelli

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.