You would be better off downloading the latest image from http://openvix.co.uk
You would be better off downloading the latest image from http://openvix.co.uk
josh_g (05-03-13)
OK, I'm going in, I maybe some time.
josh_g (05-03-13)
All loaded, thanks guys.
Cheers,
Keith.
Good glad to hear it all went smoothly!
TM-Twin*1TB HD*VIX Helios*ABM*CrossEPG*OnDemand*Blue HD 3
TM-Nano*VIX Helios*ABM*CrossEPG*OnDemand*Blue HD 3
NO CARD SHARING TALK WILL BE TOLERATED
Hi Guys,
I already have Vu Duo running VIX Image which I updated over 6 months ago.
Its unstable, stops working some times and the channels from the buquet doesn't work anymore. Its gives signal PAT error.
I thought the best course of action would be to re-flash the box and loads the buquets from the beginning.
Any suggestions?
try a re flash to the latest image and set up from scratch and see how it performs
TM-Twin*1TB HD*VIX Helios*ABM*CrossEPG*OnDemand*Blue HD 3
TM-Nano*VIX Helios*ABM*CrossEPG*OnDemand*Blue HD 3
NO CARD SHARING TALK WILL BE TOLERATED
it should install fine if you formatted the usb to fat32 on your computer before putting the image on it.
there is an option to convert to ext3 or 4 in menu/setup/system/hard disk
Do I need to put an image on it? I'm not trying to install, just use the usb stick for timeshift.
I've got the EPG running from my PC now
The last problem, for now, is timeshift.
oh i see, sorry i thought you were trying to flash an image to the box.
once the usb is formatted it should be straight forward to 'point' timeshift to use the usb.
menu/setup/system/ timeshift settings
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
First post amended and updated with OP's new updated Tutorial.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
josh_g (28-03-13)
Thanks for this - its superb. I am a complete novice with my first install. Was up and running in a couple of hours.
All of the effort in putting this together is greatly appreciated
This guide is very detailed, does the same procedure work for the solo2?
If not can i b pointed in the right direction to what is different
thanks
yes it's pretty much the same process for all Vu receivers with the exception that the Uno, Ultimo and Solo2 dont have bootloader updates and when these receivers detect a image on the USB stick they ask you to press a button on the receiver it self to initiate the flash process.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
josh_g (03-04-13)