I have installed a Vu+ Solo and all is working fine except the output is in 720p. How do I set it to 1080p?
I have installed a Vu+ Solo and all is working fine except the output is in 720p. How do I set it to 1080p?
1080p on these boxes is as far as i recall for media playback such as MKV files only not live TV.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Thanks for the reply
I don't have "mode" on the A/V Setting menu, I have the following
Color Format CVBS
Aspect Ratio 16:9
TV System PAL
WSS on 4:3 enable
Dolby Digital Default yes
General Dolby Digital delay 0
General PCM Delay 0
Dolby Digital down mix yes
Any idea?
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
Thank you for your reply
I have solved the problem, the box was shipped with old firmware, an upgrade to the latest ViX Team image has cured the problem
Thanks again