As the title, Gigablue HD800UE bootloaders will be posted here.
As the title, Gigablue HD800UE bootloaders will be posted here.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
This new bootloader has an activation period when flashing images. OK button must now be pressed to flash an image and burn.bat no longer required for images.
To flash bootloader: -
- Copy both burn.bat and cfe.bin to root of USB stick
- Power off receiver.
- Connect USB stick to receiver and power on.
- Wait a few seconds for the bootloader to flash and the receiver to reboot. Be patient, the standby button LED will go red/blue etc.., you must wait for the receiver to reboot itself. Do not remove the stick or power off until fully rebooted.
To flash images follow instructions on the LCD display.
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
New CFE for UE 31.08.2012 :
- removed imageversion
- changed lcd image file from conf.bmp to lcdwaitkey.bin
- changed lcd image file from prog.bmp to lcdwarning.bin
Make sure you use the right one for your box
All PM,s asking about c/s on cable will be ignored and reported to forum staff!