Am I missing a trick as when downloading enigma plugin settings all satellite plug-ins fail to download consequently I have no bouquets!! Looked for OPKG update but cannot find it. What do I do?
Frankblueking
Am I missing a trick as when downloading enigma plugin settings all satellite plug-ins fail to download consequently I have no bouquets!! Looked for OPKG update but cannot find it. What do I do?
Frankblueking
[COLOR="#FF0000"]Vu+ Ultimo - 1.1m Techomate 2600 motorised dish & a fixed Sky dish - 3.9.6 Kernal - Drivers 24/11/2015 - Image Was openvix-5.0.020 - CCCam 2.3 - 1TB Hard drive - Connected to Network using ethernet cable - Skin Vix-Night HD
'Latest ViX Image': which version is that?
You could try in telnet 'opkgupdate' and see what happens when you try to download after that.
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
Many thanks your message. The latest VIX Image version I downloaded is 2.4.96. It has been a nightmare trying to work my way through the process.
I found the TELNET section and typed in OPKG but not clear how to update. I would greatly appreciate a step by step guide for idiots on how to proceed.
Frustrated but not yet beaten!!!
Frankblueking
[COLOR="#FF0000"]Vu+ Ultimo - 1.1m Techomate 2600 motorised dish & a fixed Sky dish - 3.9.6 Kernal - Drivers 24/11/2015 - Image Was openvix-5.0.020 - CCCam 2.3 - 1TB Hard drive - Connected to Network using ethernet cable - Skin Vix-Night HD
just type 'opkgupdate' (exactly as I wrote it here), and try to download the settings afterwards (via the menu).
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
It's actually "opkg update" (note the space between the two Without the space will give a command not found response.
Since you are on build 96, you might want to upgrade the image. Easiest way is to go to vix menu (Blue button -> ViX), choose software update. Alternatively, you can do it in telnet using "opkg update && opkg upgrade". Current latest build is 2.4 119, so you are a few builds behind
[COLOR="#FF0000"]Vu+ Ultimo - 1.1m Techomate 2600 motorised dish & a fixed Sky dish - 3.9.6 Kernal - Drivers 24/11/2015 - Image Was openvix-5.0.020 - CCCam 2.3 - 1TB Hard drive - Connected to Network using ethernet cable - Skin Vix-Night HD
Hi,
it is called "opkg update" with a space and without hyphen. It is easier with the vix panel and choosing online-update. I think silverfox settings are not on the feed anymore.
ciao
---
Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard
[COLOR="#FF0000"]Vu+ Ultimo - 1.1m Techomate 2600 motorised dish & a fixed Sky dish - 3.9.6 Kernal - Drivers 24/11/2015 - Image Was openvix-5.0.020 - CCCam 2.3 - 1TB Hard drive - Connected to Network using ethernet cable - Skin Vix-Night HD
Hi Guys
Several problems now found, I hope you can understand what it means. I have now managed to get Telnet to find the command opkg "update" (note the placing of inverted commas!!) but it fails to update. It gives error 255. (?) I then tried opkg "update && opkg upgrade" (not sure where inverted commas belong!) It also fails to load but does find the command. (as per previous) I tried updating to v.119 using the Vu menu but that also fails to update so I am stuck on version 96. On trying to download Silverfox0786.28e.and.uk.dtt.hd.swap (20120301-f2 it still fails!! the place this adventure started. I asked a friend on v.2.3 to do the opkg update and it worked fine for him so suspect it is some thing related to v2.4. Can you help before I surrender and go back to version 2.3?
Frankblueking
[COLOR="#FF0000"]Vu+ Ultimo - 1.1m Techomate 2600 motorised dish & a fixed Sky dish - 3.9.6 Kernal - Drivers 24/11/2015 - Image Was openvix-5.0.020 - CCCam 2.3 - 1TB Hard drive - Connected to Network using ethernet cable - Skin Vix-Night HD
There should be no inverted commas. They are there to show the seperation of the command from written text. So, you should write either opkg update && opkg upgrade (now italicised so you can tell the difference, without any commas or anything...
After trying this, please post back...
After doing this, it should show in the plugins that the silverfox channels are no longer available...
Hi,
nowhere. The command is:opkg "update && opkg upgrade" (not sure where inverted commas belong!)
opkg update && opkg upgrade
and if it fails the feeds might me in maintenance mode.
I told you no more Silverfox anymore.On trying to download Silverfox
ciao
---
Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard
Sorry about my mistake; must have been too early.
It is indeed
andCode:opkg update
Code:opkg update && opkg upgrade
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
[COLOR="#FF0000"]Vu+ Ultimo - 1.1m Techomate 2600 motorised dish & a fixed Sky dish - 3.9.6 Kernal - Drivers 24/11/2015 - Image Was openvix-5.0.020 - CCCam 2.3 - 1TB Hard drive - Connected to Network using ethernet cable - Skin Vix-Night HD