New to the world of VU+ Duo

[rafter_01]

Morning All,

Hello to everyone, seems like a brilliant forum

got my VU+ Duo yesterday and would like to flash the VIX image. Slightly confused, i know how to install the image but will i need to install the bootloader first? Some guides dont tell you about the bootloader install?

What is the latest version of VIX image?

[deano41]

http://www.world-of-satellite.com/sh...elease-s..Just follow this link .All that you need is on there..

[deano41]

http://www.world-of-satellite.com/sh...mage-Release-s.. Just follow this link .All that you need is on there..

Sorry for the double post

[rafter_01]

thanks for the link, do i still need to install the bootloader even if i have the the original VU+ Duo box?

[mcquaim]

It will do no harm to flash the boot loader first anyway! Follow the guide and any questions then keep posting!

[rafter_01]

thanks for your response,

i know how to install the image but not the bootloader. How do i install the bootoader?

[mcquaim]

Exactly the same process!

Extract onto a USB stick and reboot the receiver!

When prompted, remove the USB stick and power off at the back!

Now, extract the image onto the USB stick, insert into the duo and power on..

You know the rest then...

[Stanman]

hello: and welcome mate. if you had bought from the sponsor, he would have flashed it for you

[rafter_01]

How do I install the MGM cams?

[Mr. Mister]

I take it you mean MGcamd..

FTP the ipk file to tmp folder..

Then press blue button..
Then select Vix..
Then select Install Local Extention..
Press the green button to install..
After a few seconds you will be asked to restart GUI..
Select Yes..

Now ftp your mg_cfg and your newcamd.list file into usr > keys

Now press blue button and then select Softcam Manager..
Press green button to start cam.. and then press blue button for Auto Start..

Thats all there is to it..

Hope this helps..

[rafter_01]

I take it you mean MGcamd..

FTP the ipk file to tmp folder..

Then press blue button..
Then select Vix..
Then select Install Local Extention..
Press the green button to install..
After a few seconds you will be asked to restart GUI..
Select Yes..

Now ftp your mg_cfg and your newcamd.list file into usr > keys

Now press blue button and then select Softcam Manager..
Press green button to start cam.. and then press blue button for Auto Start..

Thats all there is to it..

Hope this helps..

Brilliant, lastly where do i download the mg_cfg + newcamd.list from?

Appreciate all the help I've got so far

[rafter_01]

installed bootloader, image and mgcamd. but where do i get the mg_cfg + newcamd.list files from?

Also will i need to add my own bouquet?

[rafter_01]

got it working, free channels working... what i did was ftp'd a bouquet file to my VU+ Duo and now im getting the following message:

Vu+ Duo No Service Found Check Tuner Configuration

i think ive messed up the tuner configuration settings, can someone please assist? the dish is standard Sky dish!

[judge]

Tuner Configuration is done by Menu / Setup / Service Searching / Tuner Configuration
Highlight the tuner & click OK to change the settings.

[rafter_01]

Tuner Configuration is done by Menu / Setup / Service Searching / Tuner Configuration
Highlight the tuner & click OK to change the settings.

What are the default configurations? I have no clue