Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Results 1 to 5 of 5

Thread: Channels won't clear on boot or after going into menu settings problem

  1. #1

    Title
    Member
    Join Date
    Mar 2012
    Posts
    72
    Thanks
    9
    Thanked 3 Times in 3 Posts

    Channels won't clear on boot or after going into menu settings problem

    Hello.

    Have been given an 800hd to try and playing with it has sprung some problems as follows.

    Yesterday a channel would scramble after about 8 seconds and them come back on again 8 seconds later.
    This went on continuously for about 30 minutes regular as a clock. (I left it on that long to check fully)

    Today I have noted that it stayed on for a few minutes without scrambling so I went into setting and started
    deleting some foreign stuff that had been left on from shop owner.

    On coming out of the menu it would not clear.

    Going in to supersetting and pressing test it connected and cleared.

    I went into menu and deleted a few channels again then back out showed scrambled again.

    So I went into supersetting and pressed test and it connected and cleared etc etc.

    I have just now switched the box off and back on and it scrambled, needing me to do a
    yet another test connection on supersetting.

    Weird but consistent.

    Firmware on the box is.

    dvbs_evb_Vo3
    S/W R4750
    F/w 1.0.16777216-5379215
    Jan 11 2012

    Hope someone can help

    thanks

    ps this says it's my first post yet I have introduced my self an hour ago in the correct section.
    Last edited by lumberjack; 29-03-12 at 22:39. Reason: spelling

  2. #2
    basilyoung's Avatar
    Title
    V.I.P - R.I.P - Will never be forgotten...
    Join Date
    Jul 2010
    Posts
    3,233
    Thanks
    423
    Thanked 1,075 Times in 810 Posts
    what this post is about, is cardshare I think, and you need to read the rules of the forum, no one here will be allowed to assist you, your best bet, is ask the guy that sold you the setup, but please do not ask for CS help
    Units; VU+Ultimo/duo/DM800/7020HD/tm9100
    1.2 channel master/quad feedhorn/36volt /vbox
    1 fixed dish, and 1 motorized 1mtr dish
    and a pile of redundant cards/cams

  3. #3

    Title
    Member
    Join Date
    Mar 2012
    Posts
    72
    Thanks
    9
    Thanked 3 Times in 3 Posts
    As this question is about the firmware doing silly things I thought it would be ok to ask.

    I apologise fully.

    Quote Originally Posted by basilyoung View Post
    what this post is about, is cardshare I think, and you need to read the rules of the forum, no one here will be allowed to assist you, your best bet, is ask the guy that sold you the setup, but please do not ask for CS help

  4. #4
    basilyoung's Avatar
    Title
    V.I.P - R.I.P - Will never be forgotten...
    Join Date
    Jul 2010
    Posts
    3,233
    Thanks
    423
    Thanked 1,075 Times in 810 Posts
    is the unit ok on free to air channels??
    Units; VU+Ultimo/duo/DM800/7020HD/tm9100
    1.2 channel master/quad feedhorn/36volt /vbox
    1 fixed dish, and 1 motorized 1mtr dish
    and a pile of redundant cards/cams

  5. #5

    Title
    Member
    Join Date
    Mar 2012
    Posts
    72
    Thanks
    9
    Thanked 3 Times in 3 Posts
    Yes it is fine on fta

    It is also now doing what it was doing yesterday when I first got it.

    On for about 10 seconds, scrambled for 5 seconds, on for 10 seconds, scrambled for 5 seconds
    over and over again in a constant loop.

    Box is going back to dealer, will have to try s10 instead

    thanks for feedback

    Quote Originally Posted by basilyoung View Post
    is the unit ok on free to air channels??

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.