mgcamd 1.35a

[loochy]

Hi all thanks a lot for the new image got cccam working but cant seem to get mgcamd working got the same set up working on my vu uno any ideas thanks

[silverfox0786]

not sure what image you are using but i have been tring to get mgcamd working on vix with no success either

once i get it working myself then we will look into integrating it to vix image so to show ecm etc

[delboy13]

im using mgcamd 1.38 on vix 2.3 at the moment

[silverfox0786]

im using mgcamd 1.38 on vix 2.3 at the moment

its 1.38 im having a problem with

[delboy13]

here is the files i got working for vix image just change chmod to 755 for for mgcamd_138, Ncam_mgcamd_1.38.sh, mgcamd_1.38_cam.sh, mgcamd_1.38.nab
an ipk has been made of these files and i tested it and it works but i would have to ask author permission before posting anywhere

http://uploading.com/files/8a1316da/vix%2Bmgcamd_138.rar/

[rossi2000]

those files look like there for blackhole images.

[delboy13]

Tried the blackhole, pli mgcamd.ipk first but cam installs to usr/bin but vix uses usr/softcams. These files were from backhole,pli.ipk I just changed the scripts to usr/softcams as mentioned a mod on a different forum has made a vix.ipk of these files and it works

[silverfox0786]

i got the binary myself added it to /usr/softcams chmod to 755

created a newcamd.list and mg_cfg added them to keys

and added a test config onto newcamd.list and started it

it started just fine but wouldnt clear my card

[delboy13]

not that technical of person but learning slowly but isn't mgcamd client only so you would have to use cccam or oscam with it could be talking total nonsense for what your doing though

[silverfox0786]

not that technical of person but learning slowly but isn't mgcamd client only so you would have to use cccam or oscam with it could be talking total nonsense for what your doing though

mgcamd is a client yes

but to clear a card it needs a newcamd server to connect to which i cant get it to do

and where my officail card is

[korpen]

I had trouble with getting Mgcamd 1.35 to work, until I discovered that you had to set boxtype to {06} instead of {00}, which is default in the mg_cfg.
Dont know if it applies here, but it could be worth a shot.

//Korpen

[OneWayBet]

I had trouble with getting Mgcamd 1.35 to work, until I discovered that you had to set boxtype to {06} instead of {00}, which is default in the mg_cfg.
Dont know if it applies here, but it could be worth a shot.

//Korpen

Setting the box type fixed it for me, thank you so much, you rock

[Mr. Mister]

here is the files i got working for vix image just change chmod to 755 for for mgcamd_138, Ncam_mgcamd_1.38.sh, mgcamd_1.38_cam.sh, mgcamd_1.38.nab
an ipk has been made of these files and i tested it and it works but i would have to ask author permission before posting anywhere

http://uploading.com/files/8a1316da/vix%2Bmgcamd_138.rar/

delboy 13..

Where do we ftp these to,, as there is no ipk..??

Thanks

[silverfox0786]

an ipk i can create for it but i need to get it to work first thats what issue im having i cant get mgcamd to work to start with

[easy]

I'm using Mgcamd_1.38-ViX
works ok.