Release notes
=============================
This is a BACKUP package for the QBoxHD and QBoxHD-mini.
The software in this package reads all the content of the USB pendrive where
the root filesystem of the decoder resides AND the content of the NOR flash
and writes them to the backup USB pendrive in the form of an UPDATE package
that is used for updating the decoder.
This means that after executing this backup procedure the USB pendrive with
the backup package will have a new directory called qboxhd_update with the
following content:
qboxhd_update
|– README.txt
|– nor
| |– bs
| |– logo
| |– uboot
| |– uimage
| `– uinitramfs
|– rootfs.cpio
`– update.sh
The files contained inside the above directory can be considered a verbatim copy
of the running decoder and are ready for updating another decoder.
The USB drive where this backup package resides must be formatted as vfat.
Instructions
=============================
1. Copy the compressed file qboxhd_backup_ddmmyy.tbz to a USB pendrive
2. Optional: If you want a faster update procedure, uncompress the file
inside the USB flash drive. This will create a qboxhd_backup directory
3. Turn off the decoder
4. Insert the USB flash drive that contains the backup file/directory
5. Turn on the decoder
6. The backup procedure starts. The LCD will display the backup status.
7. When the backup procedure finishes, the decoder will continue with
the normal start-up
8. Remove the USB pendrive that will contain the just created backup.
Backup contents
=============================
qboxhd_backup
|– README.txt
|– recovery_update.sh
`– update.sh