I fitted a new satellite dish and octo LNB earlier today and used a signal finder to get it in the correct position.

After coming down from the roof as i have no internet here to make sure the receiver shows signal and the channels work i was surprised to be getting 0 so i changed cables and input i was connected to on the LNB but still nothing on the receiver. As that was an old receiver and not used in a while i connected one that i know is working but still the same. Im after cutting the top of a tree and moving the satellite up the pole in case there was something else causing the issue but still the same.

Anyone have any suggestions as to what is wrong? It could be the LNB but i would assume it would show 0 signal on sig finder if it was.

e2.jpgsigfinder.jpglnb.jpg


Any suggestions or help here would be appreciated.