Some of you may remember before I reported I had to auto reboot the box every 3 days to keep it working.
Well I have been observing the past few months that on iptv I would get a picture freeze every 2-3 seconds, the obvious thought is a network problem right?
Well if I watch 'top' in the shell every 2-3 seconds the 'si' usage goes to 100%. The software interrupts counter.
I have just clean flashed the latest vix 5.4 image and its still happening.
Given how highly rated these units are I am starting to think mine is defective, but I am hoping someone may know of a workaround to the problem.
Code:
# top
top - 18:05:38 up 10 min, 1 user, load average: 0.06, 0.04, 0.00
Tasks: 117 total, 1 running, 116 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.0 us, 0.0 sy, 0.0 ni, 0.0 id, 0.0 wa, 0.0 hi,100.0 si, 0.0 st
MiB Mem : 1004.0 total, 174.9 free, 729.9 used, 99.2 buff/cache
MiB Swap: 256.0 total, 256.0 free, 0.0 used. 241.3 avail Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2051 root 20 0 145292 73808 15600 S 0.7 7.2 0:12.22 enigma2
2193 root 20 0 6288 2276 1940 R 0.7 0.2 0:01.39 top
7 root 20 0 0 0 0 S 0.3 0.0 0:00.07 rcu_sched
1452 root 20 0 0 0 0 S 0.3 0.0 0:01.58 nxsched
1 root 20 0 1604 328 284 S 0.0 0.0 0:01.39 init
2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd
4 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0H
6 root 20 0 0 0 0 S 0.0 0.0 0:00.08 ksoftirqd/0
8 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_bh
9 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
10 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 lru-add-drain
11 root rt 0 0 0 0 S 0.0 0.0 0:00.00 watchdog/0
12 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/0
13 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cpuhp/1
14 root rt 0 0 0 0 S 0.0 0.0 0:00.00 watchdog/1
15 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/1
16 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/1