Hi There
I am new to this.
Just wondered if anyone could help me with the setup of a unicable 2 LNB on a VU+ UNO receiver.
I have a a GT S2 CCS24 LNB and have taken one of the universal outputs to another receiver.
The Unicable output goes to the VU+ UNO.
The LNB is pointing to Astra 19.2 to receive the German channels.
I have a good signal on the universal output and I have a 98% signal on the unicable output.
The problem is the setup in the UNO. It appears tuner A is working and that I can record one channel and watch another.
The problem is that I can't seem to record a second channel and I should be able to record 7 channels and watch another one.
When I look at the signal strength meter I have a signal on Reciever A and non on B but then a signal on C and D and E and F ang G but not H.
I have set up the receivers the same way.

Tuner A
Mode - Advanced
Satellite-19.2E KU-band Astra 1KR/1L/1M/1N
LNB -LNB1
Priority- Auto
LOF- Unicable/ JESS
Unicable configuration mode- Unicable LNB
Manufacturer- GT sat
Type- GT-dLNB1-DY
Channel-SCR1
Frequency -975
Tuning algorithm- Reliable, return
Connected-NO
Increased voltage-NO
Force legacy signal stats -NO


Tunner B


Mode - Advanced
Satellite-19.2E KU-band Astra 1KR/1L/1M/1N
LNB -LNB1
Priority- Auto
LOF- Unicable/ JESS
Unicable configuration mode- Unicable LNB
Manufacturer- GT sat
Type- GT-dLNB1-DY

Channel-SCR2
Frequency -1025

Tuning algorithm- Reliable, return

Connected-YES
Connected to -Tunner A: Vuplus DVB-S NIM945308X FBC0 9DVB-S2X)

Increased voltage-NO
Force legacy signal stats -NO

Then I continued as above Tunner C The channel is 3 and frequency is the 1075 and it is linked through to tuner B. And so on to H.

One thing that is wrong is the LNB type, but in the LNB box I got a list of userband ID and userband Frequencies. There are two lists and this matched the German frequencies. I read in the on screen help that is you can't find the right type LNB you can put user defined and set the SCR number and frequency your self. As this LNB matched the frequencies on my list I assumed that this was the only important thing.

I am sure that there is only one small thing wrong as Tuner A seems to be fine.
I have looked everywhere online and I could raise a support ticket with WOS as I only got it last week but thought I would try here first
If anyone can give me a tip that would be great. Sorry the email is so long but I always think you can't expect anyone to help if they haven't got all of the info needed.

Regards
Strav