I'm in Dumfries, Scotland. I have a VU+ Duo 4K SE box with 2 Twin Satellite DVB-S/S2/S2X FBC Tuner cards installed.

My Dish is pointed at 28.2 East. I connected my "LNB Unicable II - GT-Sat GT-S1DCSS24 SCR/dCSS Single Cable SCR24" to my dish and I connected the sat cable from the LNB (not the legacy port) to the top port of physical Tuner A as shown here:

VU+ Duo 4K SE Back Tuner A Circled.png

These are my settings:

Tuner A
======

Configuration mode: Advanced
Satellite: 28.2E
LNB: LNB 1
Priority: Auto
Type of LNB/Device: SCR (Unicable/Jess)
SCR (Unicable/JESS) type: LNB
Manufacturer: GT-Sat
Model: GT-S1dCSS24
Position: 1
Channel: User band 1 (0975)
Connected through another tuner: No
DiSEqC mode: None
Force legacy signal stats: No

Tuner B
======

Configuration mode: Advanced
Satellite: 28.2E
LNB: LNB 1
Priority: Auto
Type of LNB/Device: SCR(Unicable/Jess)
SCR (Unicable/JESS) type: LNB
Manufacturer: GT-Sat
Model: GT-S1dCSS24
Channel: User band 2 (1025)
Connected through another tuner: Yes
Connected to: Tuner A: Vuplus DVB-S NIM(4530BX FBC) DVB-S2X
DiSEqC mode: None
Force legacy signal stats: No

Tuner C-H are as Tuner B except they use User band 3 and onwards.

After I do an Automatic scan I get these results:
Tuner A: No channels found
Tuner B: Only 14 Channels found.

What am I doing wrong where it's not finding all the channels? Are my settings correct?