ABM Freesat, Missing 101

[ccs]

I think you'll need another gui restart to get local time instead of boot time, then run ABM, and then post the latest enigma2 debug log in /media/hdd/logs.

[abu baniaz]

Have you installed latest ABM. As you are now on Vix 6.0, make sure you use the correct version.

[avalon65]

This post was made in error so ignore it

[avalon65]

Have you installed latest ABM. As you are now on Vix 6.0, make sure you use the correct version.

Err no I don't think I have, except what was installed when I installed the latest VIX image 6.0.007 . Is ABM a separate install / image?

[ccs]

Have you installed the latest ABM? Installation method 1 is probably the easier.

I have put latest ipk here while we await an image update:
https://www.world-of-satellite.com/s...l=1#post522650

I'm running 6.0.008, and ABM was out of date.

[avalon65]

There are 2 files there in the link , which one do I use or is it both of them

[Huevos]

Have you installed the latest ABM? Installation method 1 is probably the easier.



I'm running 6.0.008, and ABM was out of date.

6.0.008 has taken 2 weeks to build due to changes in the build env.

That means some boxes will have the update and others will not.

I am currently rerunning 6.0.008 without bumping the build env or enigma to try to get the changes in ABM available on all machines.

[dsayers]

There are 2 files there in the link , which one do I use or is it both of them

cortexa15hf-neon-vfpv4.ipk
For receivers like Solo 4k, Mutant HD51, Octagon SF8008, Zgemma H9

[avalon65]

Another question, if I transfer 1 or both files to the /tmp folder, before I go to install either or both, do I have to remove or delete the existing ABM or will it be over written.

Thanks

[avalon65]

My receiver is a Gigablue UE4k, so which file please.

[ccs]

My receiver is a Gigablue UE4k, so which file please.

Post #53.

https://www.world-of-satellite.com/a...7&d=1645752377

No need to remove ABM first.


Menu/Information/About tells you the box architecture.

[avalon65]

All done but where do I post a problem with the epg

[abu baniaz]

Read this thread and double check you are doing it correctly. Disable all other EPG acquisition methods.
https://www.world-of-satellite.com/s...K-epg-download


If you still have a problem, start your own thread in any of these sections

Other EPG:
https://www.world-of-satellite.com/f...er-EPG-Support

Image Support Section:
https://www.world-of-satellite.com/f...ort-Discussion

Attach your debug log capturing the problem. Take screenshots to show the issue. Be as descriptive as possible. The more information you give, the better help you will get.

Can we please only post in this thread for Freesat 101 issues. Thank you.

[avalon65]

After reading some of the posts in the links, I think?? this section might be the best or correct forum for my minor problem.
Apologies if it is not the correct forum as I am not certain.

It started 2 days ago with the existing ABM in that the service or channel numbering was different from what it was earlier that day. After I installed the latest ABM and did a scan, the result was the same as per the picture. 101 is now ITVbe!!

I have uploaded a enigma2_debug log and hope it shows the information you require.

[abu baniaz]

22:46:57.4199 [ABM-config] placement: bottom

Information to explain:
In the ABM configure menu, you have set the option for "Place bouquets at" to "bottom".
Also, in the provider menu, why have you set the "FTA only" option to "yes" for Freesat. They are all FTA, but no big deal.

Your bouquets order is probably in following order. Channel numbering in enigma2 is cumulative. It counts all the channels in the order they were loaded.

Favourites
Last Scanned
Freesat UK all channels
Freesat Entertainment etc

avalon 65.jpg

22:47:11.9933 [eDVBDB] loading bouquet... /etc/enigma2//bouquets.tv
22:47:11.9934 [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.tv
22:47:11.9935 [eDVBDB] 0 entries in Bouquet userbouquet.favourites.tv
22:47:11.9936 [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.LastScanned.tv
22:47:11.9945 [eDVBDB] 187 entries in Bouquet userbouquet.LastScanned.tv
22:47:11.9946 [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.abm.sat_282_freesat.main.tv
22:47:11.9990 [eDVBDB] 1008 entries in Bouquet userbouquet.abm.sat_282_freesat.main.tv
22:47:11.9991 [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.abm.sat_282_freesat.101.tv
22:47:11.9995 [eDVBDB] 73 entries in Bouquet userbouquet.abm.sat_282_freesat.101.tv

187 in last scanned
100 reserved place holders for main ABM bouquet
= 287 channels before the first Freesat channel is loaded.

288 - The first channel number in the Freesat main bouquet. This correlates to your picture

22:46:57.4192 [ABM-config] level:  expert
22:46:57.4193 [ABM-config] providers:  sat_282_freesat:hd_freesat_110_c:13:
22:46:57.4195 [ABM-config] keepbouquets: All
22:46:57.4196 [ABM-config] hidesections:  sat_282_freesat:600|sat_282_freesat:800|sat_282_freesat:999
22:46:57.4197 [ABM-config] add provider prefix:  True
22:46:57.4198 [ABM-config] show in extensions menu:  False
22:46:57.4199 [ABM-config] placement:  bottom
22:46:57.4199 [ABM-config] skip services on non-configured satellites:  True
22:46:57.4201 [ABM-config] show non-indexed:  False
22:46:57.4202 [ABM-config] FTA_only:  sat_282_freesat
22:46:57.4203 [ABM-config] schedule:  True

Actions for you to do
Please change it to the default of "top" and run ABM again. Then restart your box so that we don't have 10 pages discussing cached bouquets. If there is still a problem, post the Enigma2 debug log showing your last run of ABM


Debug
Thank you for attaching debug log as well as the picture. Gets you the solution instead of the 20 questions. At no point did you mention the cause of your issue.