I've been reading with interest the many threads on Unicable/FBC, etc mainly from this Forum so thank you
However, I also found the following wiki page:
https://wiki.vuplus-support.org/inde...Dual_FBC_Tuner
This was based on VU+ but principle is same as other comparative boxes.
The thing that caught my eye is the section on Unicable.
Now this wiki is pretty much as mentioned in the extensive guides on this forum, albeit with one thing I noticed different...
The Wiki states the "Connected to:" option should reference the Tuner letter before current one and not all connected to Tuner A. Eg, Tuner C must therefore read "Connected to B", Tuner D "Connected to C", etc.
Does this make a difference as it clearly states they shouldn't all reference Tuner A?