Gigablue uhd quad 4k no blindscan. Latest VIX image but it sits there nothing happens even after an hour. Have to switch off power and restart.
Do you have a blindscan capable PnP tuner added?
Just the tuners that cam with it. Lists Tuners A to H NIM 45208 FBC
I seem to think no longer blindscan on FBC tuners need S2X tuner - but also seen elsewhere they are waiting new firmware from Giga for blindscan
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Odd as it used to work until I did a new flash of the latest Vix image.
Loaded openvix-5.2.045 which I found in my downloads. Blindscan works fine now.
I'd like to try this OpenVIX image on my Gigablue UHD UE 4K receiver. Would you still have it available? Thanks.Originally Posted by Emulated
See here: GigaBlue Images (openvix.co.uk)
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
Please help keep OpenViX online, donate HERE.
Rules can be found HERE
Support our sponsor World-Of-Satellite HERE
GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable
What Sats are you using blindscan on??
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
No blind scan on my Gigablue so will have to buy another tuner or will it be fixed
We are of the understanding that the onboard tuners do not support blind scan.Please advise if incorrect.
However, there was a commit to enable function in more GB devices.
Which gigablue its certainly enabled on all 3 main receivers in features (blindscan-dvbs blindscan-dvbc ) both Arm and HiSilicon
Which sats are you trying to blindscan?
Last edited by twol; 16-12-19 at 13:19.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
OP started the same theme last week....
https://www.world-of-satellite.com/s...k-no-blindscan
abu baniaz (17-12-19)
Gigablue UHD Quad 4K. Unable to blind scan on any sats with the later images. Used to be able so I flashed openvix-5.1.033 with no restore and only selected one satellite in the tuner setup 23.5 as the dish was already on that satellite. Did a blind scan for Channels FTA, filtering out ypto 3 degrees. 112 found.
I guess you are using the s2x plugin tuners?
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Posting Permissions
Reply With Quote