Hi there,
I am trying to download plugins via the green button all I get is message saying error try later which I've done now many times and it's still the same. Any suggestions would be appreciated.
Thanks Bluecol52
What image? Menu > Info > AboutOriginally Posted by Bluecol52
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Hi,
Image type : release
So for the last time, what ViX image are you on?
The latest available image is 5.0.013, so I expect to see something similar when you reply.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
The numbers in front of (Release) is what you need to post.
seame (22-04-17)
Its at the top of the thread. Stop using an iphone and talking down to people.
Zgemma H7S running OpenVIX 6.2, Darkmotor, Triax TD110 dish, Inverto Black Ultra dual lnb
LG 50UM7450 4K TV, Pioneer VSX-534 Atmos AVR , Panasonic UB820 region free 4K Bluray & a PS4.
seame (22-04-17)
I think he just input the number from the example. Lol.
abu baniaz (24-04-17)
Best way to find issue is to issue following command
Code:opkg update
IMG_0017.jpg
Hiya thanks for everybody's replies, I am a real newbie to all this, so please bear with me! I have attached an image of screenshot of the about screen on box. I would appreciate any genuine help with my issue.
Thanks in advance!
You will need to update to the latest software 5.0.013.
http://www.openvix.co.uk/index.php/d...ges/vu-solo-2/
However this will wipe the box and you will need to set it up from scratch yourself.
by looking of the image it look like you are on a very old image. plugins do not wok on that image. the only option you have is to usb fresh full flash of the box and setup everything from new
PLEASE DO NOT PM IN REGARDS TO CS TALK OR OTHER ILEGAL MATTERS. IT WILL BE REPORTED TO THE ADMINS
How do I go about flashing the drive then? Is this the reason I can't get the mgcamd file to install via local extensions?
Thanks again!
If you have the ipk (mgcamd) file should work fine
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
But wouldn't hurt to do a nice clean install and start a fresh by flashing the latest available image for your receiver.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
A couple of times I have loaded the ipk file from FileZilla and then installed it on my box through local extensions, but when I look in the user/keys folder it's empty, so I haven't got any of the files I need to add my n line e.g newcamd.list
Is there a way of downloading the newcamd.list from anywhere to manually put in user/keys through FileZilla?
Thanks
Posting Permissions
