Xtrend 8500 cable tuners openvix

[murphyb007]

Hi guys, hoping someone can help me please. I moved to Belfast and wanted to use the box for Virgin Media. I have cable in the house but for some reason the box is not getting a signal in the signal finder? Have I missed something? Thanks


Sent from my iPhone using Tapatalk

[Andy_Hazza]

You'll need the correct Net ID for that area.


Sent from my iPhone using Tapatalk

[murphyb007]

Thanks Andy, how do I go about that?


Sent from my iPhone using Tapatalk

[Andy_Hazza]

Looks like the NetID for Belfast is 00021.
You need to add that/find that in the Providers list if using ABM (AutoBouquetsMaker). Please note though you will only get a handful of FTA Channels. Also note, no line talk is permitted on this forum, so please be careful where you go with this. Also please note In the Tuner Configuration setup, leave the Net ID as all zero's.
Any other questions just ask!


Sent from my iPhone using Tapatalk

[murphyb007]

Thanks Andy, appreciate help..does the NET ID activate the cable for the FTA channels? I mean I don't need to call Virgin to activate the line etc?


Sent from my iPhone using Tapatalk

[Andy_Hazza]

Should be ok. Give it a whirl. ABM is pretty quick as scanning.


Sent from my iPhone using Tapatalk

[murphyb007]

good stuff thanks again


Sent from my iPhone using Tapatalk

[murphyb007]

Got it sorted, thank you.. is it possible to record one channels and watch one with one cable?


Sent from my iPhone using Tapatalk

[Andy_Hazza]

Got it sorted, thank you.. is it possible to record one channels and watch one with one cable?


Sent from my iPhone using Tapatalk

You need more than one cable tuner to be able to record and watch another channel. If you do have more than one cable tuner, you would put the main coax feed into Tuner A (Input) & then use loop through cables from Tuner A (Output) to Tuner B (Input) and so on.


Sent from my iPhone using Tapatalk

[murphyb007]

Thanks; there's two cable runners on the box but just the one cable into tunner a, I'll do what you say, cheers


Sent from my iPhone using Tapatalk

[murphyb007]

Hi, I tried to change tunner b and it wouldn't allow a loop through?


Sent from my iPhone using Tapatalk

[abu baniaz]

Hi, I tried to change tunner b and it wouldn't allow a loop through?


Sent from my iPhone using Tapatalk

There is no loop through tuner configuration for DVB-C or DVB-T

Physical/real life: Use a loop cable
Software/tuner config: Set exactly same as other tuner. It is connected to same signal source

[murphyb007]

Sorry. Not sure exactly what you mean. Is there another part I need to add on, Is there maybe a guide please for the configuration?


Sent from my iPhone using Tapatalk

[abu baniaz]

In tuner configuration, you must set Tuner B exactly the same way you did tuner A. There is no loop through option for DVB-Cable

http://www.world-of-satellite.com/sh...le-Terrestrial

[JonMMM]

You need a cable that goes from Out on Tuner A to In on Tuner B