IMG_3973[1].jpg
got a small gap all around the lcd display that is the tv channel on tv
any ideas to sort out?
IMG_3973[1].jpg
got a small gap all around the lcd display that is the tv channel on tv
any ideas to sort out?
reset it and on boot up , the small gap still there on any lcd skin setting. seems needs to be set like user settings for gui? wide height etc
Never found a way around it when had mines. Posted here and on other forums. No gui/positions settings seem to touch that
yep, making my ocd go mad, as a big black square and bootup logo in back
like someone has sized the screen wrong in settings? like 4.25 not 4.3
http://www.world-of-satellite.com/sh...very-day/page5
i have a 65inch tv and have had to bring in the sides of my user settings as missing the M of menu in top left
i bet this is a problem
even setting tv output to 1080p its ONLY 720p on user settings and skin setup
Last edited by river-rat; 16-12-16 at 15:36.
ok its a bug:
go menu > setup >system >
user interface > position setup >
click yellow for defaults and screen goes back to normal, but i miss half of the red button on bottom left and 5px of the letters
but when i come out, the 3mm gap on lcd is gone, so its overscan of something problems
now i go back to 1080p and pick a channel the gap is back!!!
IMG_3974[1].jpg
posted on xtrend site, but be great if the vix guys can look at it. not skin related as i tested 10 skins and the same
even on boot up you can see the gap and in the back the snow leopard boot logo
Bangord30 (16-12-16)
My actual tv was fine after a Vix update, even on reboot, everything fitted fine like it used to. But the little screen never was full screen if I remember right. On my old 720p Bravia overscan can't be turned off apparently
you have 2 choices.
1. fix overscan on your TV
2. write down the changes when you modify the receiver in user interface/position setup
Then reset to defaults & reboot
Then enter written settings and save.
As long as you do not reboot you will not see the live TV around the edges.
E2 reboot is fine.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
installed openatv and working with no gap on all channels
fixed boot up as well
IMG_3976[1].jpg
Bangord30 (16-12-16)
Last edited by twol; 16-12-16 at 17:57.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
default on
just re flashing as some reason still mgcamd prob
twol (16-12-16)
seems to be all sorted on cccam, but cant for the life of me ( should know after 8 years ) how do i get the dish up in top right moving on openatv lol
top left i mean when ur moving sat to sat