is there an adaptor so can use with a normal sized LNB
http://www.world-of-satellite.co.uk/...and-wall-mount
is there an adaptor so can use with a normal sized LNB
http://www.world-of-satellite.co.uk/...and-wall-mount
TM do an adaptor.i had to get one to fit another lnb to my sky dish as well.
Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
Vu Solo4K, OpenViX 5.0, 8xdvb-s2
Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB
could you send me a link so i can get one please as wos don't sell
There is no point as you can get raven LNBs that are just as good as standard 40mm LNBs.
The days of poor quality mini dish LNBs are over.
BRAVEHEART (17-12-16)
but i need to put a new 40mm lnb for solo 4k on
Post a picture of dish you have, the lnb end is most important. You don't want a link to a mk3 if you have a mk4.
A standard Raven LNB is OK for solo 4k
Why do you think there would be a problem, an LNB is an LNB.
The are differences between Sky dishes and LNBs.
Code:http://www.satcure.co.uk/tech/LNBpics.htm
Last edited by abu baniaz; 14-12-16 at 00:57.
As I said earlier if you have a Raven Sky dish just use a Raven LNB.
They will give you just as good a signal as a 40mm LNB and will work with all standard receivers including the new 4K receivers.
You can get top quality Raven dish LNBs from the usual place for less than £10.
You can get an adapter to fit the mk4 raven lnb's to older mk sky minidishes, google sky minidish legacy adapter there peanuts to buy.