Hi there!!!

The truth I'm not very active in this kind of forums, because my knowledge is very limited, and I think there are a lot of people with more knowledge than me ... I can't contribute too much... So I limit myself to read and learn, because so far all the problems I've been having I have solved reading ...

The mess ... For some time now (I can not say exactly how much, one month approx) I have been seeing that the channel list could not display all channel ... Many of them were grayed, and could not see them. So I restarted E2 and the problem was solved... By the moment.

That became more common, so some days ago I decided to update the image, because I was pretty sure it was a software problem... Not hardware. I have the Gigablue for 10 months.

So factory reset, and install openATV 5.3 ... And start my private hell ...

The truth is that before installing the 5.3 did not give many turns to the subject ... I thought directly that it was a software problem that would be solved with an update ... But it was not so ...

I installed openATV 5.3. Community antenna. Softcam manager and CCcam 2.3.0. Tuner A pointing to Astra 19.2. The tuner B loop through A tuner. A list of channels updated. With this configuration, i have been working since December.

When I start recording a channel, almost the rest of the all channels are grayed ... I can see the rest of channel in the same TP I'm recording, and some more.

I realized that, checking all the channels, most of them were tuned by Tuner A, except some channel from a TP which were tuned by B tuner... It seemed that TP was "blocking" the tuner B. So without thinking twice I "deleted" all channels from that TP ... But nothing ... we are still the same. When I start recording, i only can see the channels from that TP.

I tried openmips, openvix, and I tried openATV 5.1... I updated the bootloader ... I tried all older versions than 2.3.0 Cccam ... I put the tuner B in "equal to a" instead of loop ... I have tried both tuners individually disabling the another one, and in both cases i can watch all channels but logically I can not record and watch different channels ... I tried to force recording with the B tuner ... I plug antenna cable in both tuners to have both tuners pointing to Astra 19.2 ... I thought the problem was just the channel list, so I made a clean search of channels ...still the same... In short, I've run out of ideas, and I do not know what else can I do ...

The last thing I am thinking on(I do not know if i can do it) should be forcing to use the tuner A for watching and B for recording ... But I didn't find the option to force a channel to get tuned by a fixed tuner.

I starting to think that there is a hardware problem ... that has been broken any of the tuners ..

Any suggestion or advice?

Thanks in advance!