Me Again...................
System just crashed out of the blue no warning can telnet/ftp to box but no control over the unit itself via remote or web gui.
Crash log attached.
Chuf
Me Again...................
System just crashed out of the blue no warning can telnet/ftp to box but no control over the unit itself via remote or web gui.
Crash log attached.
Chuf
I also have another log in there about the same time which is showing as 780meg!
Any ideas?
chuf
Probably best to clear it too, then restart (again).Code:<285788.107> [eventData] EPG Cache is corrupt (eventData::~eventData), you should restart Enigma!
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
Epg deleted logs deleted, restarted box re-loaded epg............
Any ideas why this happens? its set to auto download every night at 1am........
You saving EPG to your HDD?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Might be an issue?
Not exactly sure of the timing issues here, but on a shutdown enigma2 will be sent a signal to shutdown as init leaves state 3. The system will then (without waiting, I think) to shutdown other processes by running the K* scripts in /etc/rc0.d, then run the S* scripts, where S20sendsigs will send a TERM to everything else then, after 10s, send a KILL signal to terminate everything.
There could be a problem with enigma2 having to spin up your hard-drive to write out the EPG data (it only reads it at startup and write it at shutdown). It could be possible that it gets KILLed in the middle of doing that re-write, which could result in the corrupt cache.
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
how did you delete the epg data?
It will depend on when it gets round to using a part that is corrupt, and how corrupt it is.
There was an "EPG Cache is corrupt" entry in the log over an hour before the actual crash.
Code:<281525.982> [eventData] EPG Cache is corrupt (eventData::~eventData), you should restart Enigma!
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD