Hi
Is it possible to set up remotestream outside home network?
Hi
Is it possible to set up remotestream outside home network?
You could use a service such as DynDNS which will set-up a DNS name that resolves to the current address (that's a chargeable service) and use that name.
You'd also need to enable the incoming call on your router.
At that point your system will be accessible to everyone anywhere on the Internet - and it will get probed and used (there are several threads noting this on the forum).
So you really need to use a VPN.
MiracleBox Prem Twin HD - 2@DVB-T2 + Xtrend et8000 - 5(incl. 2 different USBs)@DVB-T2[terrestrial - UK Freeview HD, Sandy Heath] - LAN/USB-stick/HDD
Has anyone managed to use remotechannelstream converter plug in over WAN?
Like @Birdman says you really need to be using VPN.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Double post. Please remove.
Last edited by kryton; 20-05-16 at 13:22. Reason: posted twice
Ive had it working but it was very glitchy due to my poor upload speed talktalk provide me with
im switching to virgin at some point this year.
It's a wise idea to change the default password and there is an app on playstore called "transcoding for xtrend" that works well for streaming.
You would connect to your WAN ip and set the router to port forward to your box.
But as mentioned a VPN would be better.
Well that is the thing. I have that app which i use for streaming and transcoding outside the box. So what i do is when i want to use it, i log into my router settings and open the relevant port. (I always disable it when not in use).This then forwards the relevant ports for me to watch on my phone or tablet remotely.
But i can not get this to work with remotechannelstream converter. I type the wan ip address but it does not download any boqeuts. I need to try look into it more.
Thanks
If i remember correctly you do have to set a password / change the default password before you can stream over the net.
Have you changed your default root password?
Hi, I have used remotechannelstreamer to connect a vu+ zero in Spain to a vu+duo in the UK, both openvix 4.1.012. UK upload speed is 16mbits and Spain download is 30mbits (both fibre). To connect the two I have two raspberry PI2s running Openvpn.
I have tested the PI2s and they are capable of sustaining a 26mbit crypt/decrypt connection via a udp tunnel. Even though there are about 16 hops between the two and a latency of 70ms between the UK and Spain the SD channels are almost faultless, maybe .5 second glitch once an hour, HD is more glitchy, about 20 seconds of little glitches per hour. It seems to need 4mbits for SD and about 8-10mbits for HD.
The one thing I haven't found yet is how I can control the buffer sizes at the vu+ zero end, I'd trade a slightly slower response zapping for a solid HD picture.
You sound like you know exactly what you're doing? Good, cos I don't!
Therefore, I was hoping you might be able to help?
I'm setting up an Xtrend ET8500 downstairs and an Edision OS Mini upstairs. I have a multiroom Sky dish cable that'll fit to the edision but no VM cable, as I was hoping to get Virgin channels wirelessly.
Andy_Hazza mentioned RSCC, but what do I need in order to get VM channels wirelessly?
sorry, I'm very new to this digital receiver world......