24hz?

[DaMacFunkin]

Hello I have some 24hz media files, if I play them back on my duo2/solo2 they play at 24hz so long as the box is set to multi.
If I play the same files on solo4k I get a black screen, I then need to switch from multi to 60hz which tbh is undesirable.
I'm sure Robin VD or some other mod said that vix has a fix for 24hz files so that you don't get a black screen, does that mean it hasn't been applied to the solo4k or is it that the fix doesn't work with the solo4k driver?

[rossi2000]

im not sure of this fix, do u have a link to the post made about it?

[Sicilian]

Wait for build 036 with GST1.7.1, I found with refresh set to multi, playing media files that are 24p will play with 24p.

[DaMacFunkin]

Hello I have done USB flash of 036 with settings restore, still no joy.
With box set to 2160p@50 files play as well as can be expected, with box set to 2160p@60 files play but with a bit of SOE. With box set at 2160p multi the file starts to play, the delay check kicks in and the screen goes black but audio continues, if there are subtitles these are still visible. If I press the info button on my TV remote it reports 3840x2160@60p which just isn't right.
If I set box to 1080p@multi I get the same black screen, yet with audio and subtitles but the TV info button now reports 1920x1080@24p.
All the files playback fine on duo2 and solo2, they also play back at 3840x2160@24p on Nvidia Shield Android TV.
I have had my solo4k since day1 and I tried all the images as they came out and only one has been able to playback 24p correctly and that was VTi which is the original image almost.
So what is changing from the original image to OE-A images?
Thanks for any feedback.

[Trial]

Hi,
just for information VTi also did not support 24Hz from the beginning. The problem is that the 4K is not so wide spreaded. I think it is a small problem but a big one without the box.

ciao

[rossi2000]

even with a 4k box, the next hurdle is a 4k tv
and now i have to wait for the next models of 4ktv before i buy.

[Sicilian]

Vti have somekind of hack in their e2.


Sent from my iPhone using Tapatalk

[DaMacFunkin]

Hi,
just for information VTi also did not support 24Hz from the beginning. The problem is that the 4K is not so wide spreaded. I think it is a small problem but a big one without the box.

ciao

I used VTi from the start on solo4k, it did support 24hz playback, it also displayed xbmc home screen in full screen rather than in quarter of the screen.
No other images i have tried since did or do, Blackhole, openATV, openVIX.
I really don't want to have to flash back to the first VTi release to prove this, i know what i saw, i even commented on how pleased i was that it worked on VTi forum.
If it never works, then so be it, i have other means, i just try to make things easy for the family, but let me say it is poor if it never works.

[DaMacFunkin]

Just updated to Vix 4 002, still doesn't work, poor really seeing as it works on much cheaper less featured boxes.

[Sicilian]

It's not down to us, VU+ are awaiting a fix from Broadcom. Complain to VU.


Sent from my iPhone using Tapatalk

[Sicilian]

For the record VTi are using a hack.


Sent from my iPhone using Tapatalk

[Lightwizzard]

Can you tell me a little bit more what vu is waiting for from Broadcom? Any timetable?

VTI is jumping forward at the beginning and backwards again. That's only a workaround:

--- /usr/lib/enigma2/python/Plugins/SystemPlugins/AutoFrameRate/plugin.py
+++ plugin.py
@@ -4,6 +4,7 @@
 from Plugins.Plugin import PluginDescriptor
 from Screens.Screen import Screen
 from Components.config import config
+from Tools.HardwareInfoVu import HardwareInfoVu
 
 class AutoFrameRate(Screen):
        def __init__(self, session):
@@ -11,9 +12,10 @@
                self.lockTimer = eTimer()
                self.lockTimer.callback.append(self.unlockFramerateChange)
                self.framerate_change_is_locked = False
-               self.locktimer_timeout = 3
+               self.locktimer_timeout = 60
                self.lastService = None
                self.__event_tracker = ServiceEventTracker(screen = self, eventmap = {iPlayableService.evVideoFramerateChanged: self.VideoFramerateChanged})
+               self.need_reset = HardwareInfoVu().get_device_name() in ("solo4k", )
 
        def VideoFramerateChanged(self):
                if config.av.videoport.value in config.av.videomode:
@@ -76,12 +78,29 @@
                                f.close()
                                self.framerate_change_is_locked = True
                                self.lockTimer.startLongTimer(self.locktimer_timeout)
+                               if self.need_reset:
+                                       self.doSeekRelative(2 * 9000)
                except IOError:
                        print "error at reading/writing /proc/stb/video.. files"
 
        def unlockFramerateChange(self):
                self.lockTimer.stop()
                self.framerate_change_is_locked = False
+
+       def getSeek(self):
+               service = self.session.nav.getCurrentService()
+               if service is None:
+                       return None
+               seek = service.seek()
+               if seek is None or not seek.isCurrentlySeekable():
+                       return None
+               return seek
+
+       def doSeekRelative(self, pts):
+               seekable = self.getSeek()
+               if seekable is None:
+                       return
+               seekable.seekRelative(pts<0 and -1 or 1, abs(pts))
 
 def autostart(reason, **kwargs):
        global session

[twol]

Why would Broadcon do any thing? They produce chips to meet certain requirements and specifications and sell to people like VU+ and they are certainly not going to rejig their production line .... that costs a lot of money.
They will already be concentrating on the requirements for the next range of chips.

Judging by the general comments I also think Vu+ believe they have finished the job, after all you guys are buying the receiver, so,they will take the money and move on as usual

[Sicilian]

Vu need driver fix from Broadcom, they are aware of the 24hz issue with media playback. I'm just the messenger


Sent from my iPhone using Tapatalk

[Rob van der Does]

It won't be the first time Broadcom is actively involved in sorting out issues with their chipsets/drivers. So let's await the results.