Have you tried rear usb ports as well as the front one? No other usb inserted while trying to fresh flash? What makes of usb sticks are you using and sizes?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
You appear to have a hardisk .... Try disconnecting it ..... One of the screens seems to,indicate an issue if I am reading it correctly.
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
hi everyone and thanks for the suggestions the usb sticks are various sizes less than 2 gig and have flashed boxes before with them formatted fat32
they had an external usb hdd connected but it has been disconnected since
just tried tone of the back usb port no joy
does anyone know a way of flashing from ftp bear in mind i cannot telenet
ok everyone just an update i have updated box with an openpli nfi image using the vu util 2.01
and everything is working
but i still have the issue with upgrading via usb stick on the vix latest image so i have no way to upgrade box to vix which imho is the best
Is it a genuine receiver? Any noticeable stickers on the back that say v1.0, v2.0 or v3.0?
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Yes it's genuine I wouldn't know what to do with a clone
image.jpg
Just in case here's a photo of the back
Now there are other people on here who will be able to explain in more detail, but if you upload via FTP a backup or image you can install it via FTP - not sure of the commands....??
Thanks,
FP.
Thanks FP that could be me solution
I had this same problem with a solo2 with USB sticks I've used before for images I found I needed to download a fresh image from openvix website and used a freshly formatted 8gb Kingston USB
Well you would do with it what you would do with a genuine box till it fudged up...Originally Posted by boomer35
The fact you are having trouble flashing vix, but you have been able to flash a smaller pli image would prompt me to think you have internal memory problems.
VU+ Ultimo 4K 3TB, 1x Twin DVBS-2 FBC / 1x DVB-C FBC/ 1x Twin DVB-T2.
VU+ Solo4k 2TB, 2xFBC-S2, 2xC/T2, 1x Sundtek .
1m Motorised Single LNB Dish, 60cm Fixed Octo LNB Dish.
Samsung 65HU8500 with SEK-3500, Denon AVR-X2200W 5.1.2.
Oppo UDP-203
Panasonic 55VT50.
Zidoo X9S
Amazon Fire TV 4k & Amazon Fire TV (SPMC sideloaded).
Thanks Da any advise on how to clear the internal memory?
thanks everyone who replied
i got a new 4 gig mini sd card in the post and the box took the image
my bud is back on vix
Posting Permissions
Reply With Quote
