3.2 update build 24

[buz]

Hi

Just did full re flash without restore to 3.2 ver 23 and all good.

Icon flashed to show ver 24 update avail

Pressed to update but box stuck on update this will take a few mins

Waited at least 10 mins but no luck so Turned off at back of box and rebooted.

Still on ver 23.

Is there an issue or does it just take ages for the update to go through.

[khan888]

Hi

Just did full re flash without restore to 3.2 ver 23 and all good.

Icon flashed to show ver 24 update avail

Pressed to update but box stuck on update this will take a few mins

Waited at least 10 mins but no luck so Turned off at back of box and rebooted.

Still on ver 23.

Is there an issue or does it just take ages for the update to go through.

I'm having the same issue on my miraclebox premium ultra. Tried to update it twice and just stuck on update in progress, had to reboot via switch at the back.


Sent from my iPhone using Tapatalk

[city]

Mine did the same still on build 23 after update failed

[thisntaht]

Duo2 here and updated to build 24 via online update and no issues,
Flashed build 23 with USB and no setting backup,
Don't know if that made the difference?
All working perfectly anyway

[Huevos]

Did you do a fresh flash to 23.

[khan888]

Did you do a fresh flash to 23.

Fresh flash of build 23 with a settings restore from me .


Sent from my iPhone using Tapatalk

[Bazzer]

Just done my Mutant all good this end and no issues. I did 023 via Image manager with settings restore.

[ronand]

No problems on my solo2

[birdman]

FWIW: I've just done an on-line update to 024. Seems to be fine and although it did seem to reboot unusually quickly after doing the backup it has updated packages.

[leshay]

Hi
Gigablue update to 024 fine here.

[IAmATeaf]

I couched flashed 23, then did a manual restore of settings, then noticed an update so updated to 24 without any issues - this on an ET10000.

[city]

Update worked ok on second attempt

[buz]

Mine also worked on second attempt

[chaser]

For what it's worth, I've also had a similar issue with the online update to v24 on my Duo2. Couch flashed to v23 and did a settings / plugin restore before doing the online update to v24. Similar to others, the update seemed to get stuck, but I just left it whilst I took the dog out for a walk. When I returned the update appeared to have completed, but I am now left with a phantom update available message, indicating that 2 packages are available for update, but there are no details.

I haven't bothered doing a full reflash yet but I will do tomorrow.

[birdman]

When I returned the update appeared to have completed, but I am now left with a phantom update available message, indicating that 2 packages are available for update, but there are no details.

Login to the box and run:

opkg list-upgradable

and/or

opkg upgrade