Timeout for tuner lock

[SR4850]

Hello

Recently been having trouble trying to update my channel list, I have tried every possibility from changing the LNB, Dish and cable but have not had any luck and the error still occurs each time I search for channels. I have attached the error log any help would be appreciated

Thanks

[Huevos]

Please post a screen grab from SatFinder.

Tuner A,
28.2E Astra 2E/2F/2G
User defined,
DVB-S,
11778,
Vertical,
27500
Auto,
2/3.

[duoduo]

Recheck your connections, I had this issue for a while. Changed the connectors and all was well for a while but then it turned out it was my lnb so changed it and working well. It has to be one of these where the issue lies..

[SR4850]

Please post a screen grab from SatFinder.

Tuner A,
28.2E Astra 2E/2F/2G
User defined,
DVB-S,
11778,
Vertical,
27500
Auto,
2/3.

Here, Thanks for the help but as the poster said above do you think it could be the LNB?

[ronand]

Your location and dish size?

[SR4850]

East midlands 85M.. could their possibly be a hardware fault with the receiver?

[Huevos]

It's a hardware fault. Could be dish alignment, LNB, cabling, connectors or STB.

[judge]

Here, Thanks for the help but as the poster said above do you think it could be the LNB?

Could be any hardware fault. f-plugs/cables/lnb/dish/box as you're not getting any signal.
Have you any other box to test with? easiest way to rule out box fault. Other than that, it's replace hardware 1 by 1 starting with f-plugs.

[DaMacFunkin]

85m? Man what are you NASA?