Now I am using OpenPli ,I would like to install openVix in to my receiver,I already down load it,Please tell me how to up load openVix & Weather should I delete openpli & install new one????
Now I am using OpenPli ,I would like to install openVix in to my receiver,I already down load it,Please tell me how to up load openVix & Weather should I delete openpli & install new one????
Format a usb to fat32, extract the file onto your usb and insert it into your receiver and turn your box on and follow the instructions onscreen. Simples.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
Now I am facing another problem,Receiver will start normally ,after one or two minute will start freezing Please help me to solve this problem.Attached ss with this.20150510_150811.jpg
It is possible you had teh older bootloader onyour Twin. Flash the latest one.
K.Withnage (19-05-15)
I think I have seen this as abu has said. I think this is the latest boot load here.
http://www.openvix.co.uk/index.php?d...rs/TM-TWIN-OE/
and then flash hades 008
abu baniaz (18-05-15),K.Withnage (19-05-15)
HDMI cable is OK.
My.Technomate Twin OE Again problem.2 week I did not use it,Power of & kept it,After 2 week Receiver cannot start,It is only display starting ,but no.I try to install latest boot loader & image but same thing happen Only display starting. I change usb port & usb stick several time, also nothing happen.Please help me solve this problem.
Ring Technomate.
May need jtagging and PSU is possibly on its way out.
K.Withnage (12-06-15)
Please explane jtagging & PSU. Thanks
PSU= Power supply unit
Jtagging= They connect wires to receiver and program a file that way. You can then flash image normally