It does change the SD to 576 NOT 1080. HD channels use 1080, SD when All Resolutions is set will be upscaled to 576!!
It does change the SD to 576 NOT 1080. HD channels use 1080, SD when All Resolutions is set will be upscaled to 576!!
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
No what I mean is when changing to SD channels it says 576 on the info bar but the TV flashes and changes to 1080 which doesn't make sense.
Your tuners receiving a 576 signal, that's why it says 576. Its upscaling it to 1080 and sending it to your TV, that's why that says 1080
You could try changing the resolution on your tuner to 576. It could be that your tuner is doing a poor job at upscaling and the image sent to your TV is suffering
If you change the resolution on the tuner to 576 it should send the untouched 576 signal to your TV, without upscaling it, possibly resulting in a clearer picture
I'd also try setting my TV to 576
Last edited by Pickle; 01-06-15 at 20:37.
SD channels certainly look better on a plasma than led..
Sent from my iPhone using Tapatalk
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K