Originally Posted by rossi2000
Play back is fine unless you pause or try to forward wind or rewind the recording.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
XBMC Launcher doesn't work for me either. I have a Solo2. Doesn't uninstall properly either so gonna do a fresh flash n will let you know peeps.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
@phoenix... That is inherent in a xbmc stand alone, the TV scraper isn't always good with the titles of the recorded .ts and fast forward rewind of the .ts can cause crashes and hang ups, even a really powerful system.
when playing back prerecorded ts-streams xbmc seems to use the standard media player and not using the proper xbmc player
iplayer on the xbmc plugin uses the xbmc player.
there is no sound xbmc player hope vu+ fix it someday
Hi,
did you install it? It is not installed by default it is a plugin that must be installed. With this line it is installed but this could also be done with the remote.
ciao
---
Sat:VU+ Ultimo4K/Solo4K/Duo2/2*Solo2/Ultimo
Remote: Harmony 200, 700, Link, Smart Control, Smart Companion, Elite, 2*Ultimate, Keyboard
I installed XBMC Launcher on image vix image build 142 (vu+ duo2) and when I pressed it to run it, the screen went black, nothing happened for 5 seconds, and it just returns to the plugin browser page.
Yes I rebooted after I installed it but it just did not work, tried numerous times.
I uninstalled it and after a reboot its still there in the plugins section even tho when I press the remove plugins button its not there,
So it must be removed but its still showing on the plugin browser page
Am I missing something?
Try installing it with the telnet command I posted earlier and see if that works, and was your image a fresh flash to Build 142 (with or without a settings restore) or a online update from a previous image ?. all of this information however trivial it seems is vital to us when looking into possible bug reports.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Installing with telnet command had the same results. It was an image upgrade from build 138 with a setting backup,
unfortunately I won't be doing a clean install just to see if it makes a difference, haven't got the time or interest.
Hope that info is of use.
Just to confirm I have done a fresh install of 142 with no settings/plugin restore and XBMC is all good here.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
But does it actually play your films back? I've scraped my collection on my NAS and it has found information for them all, all my films are 1080p blu-ray ripped mkvs mostly with DTS core audio, none of them play, the player just sits at 0:00 and does nothing, it doesn't crash because if I press stop it takes me back to my list.
It looks like xbmc but if it can't play films then it ain't.
Hi guys is it xbmc 1.1 20141219.0_beta_r0 to install from plugins?
Vix image (usually latest) - VU Solo 4K- WD 1TB INTERNAL HDD - DVB-T Freeview, trialling IPTV options
If my response has helped you, don't forget to hit the thanks button below. I appreciate you appreciate me
yes thats the one
Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
Vu Solo4K, OpenViX 5.0, 8xdvb-s2
Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB
duoduo (10-02-15)
i got loads of 1080 blurays rips mkv with dts core audio and most work fine
Vu Ultimo4K, OpenViX 5.0, 8xdvb-c, 8xdvb-s2, 2xdvb-t2
Vu Solo4K, OpenViX 5.0, 8xdvb-s2
Dreambox DM900, OpenViX 5.0, 2xdvb-s2, 2xdvb-c/t2
Terrestrial, Cable, Fixed 28.2e + Unicable2 LNB
Just use this command
Code:opkg install enigma2-plugin-extensions-xbmc
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Well none are playing back on my solo2 from my nas.
I have just mounted my NAS via SMB directly in the solo2 and all Mkv files play fine so defo a bug with xbmc media playback.
As soon as I reload xbmc and try to play the same files they don't play.
Last edited by DaMacFunkin; 10-02-15 at 20:57.
Posting Permissions
Reply With Quote