Timeout for tuner lock

[abu baniaz]

@Bigcoops, we need to esatblish your reception of the transponder used by ABM is correct. Your pictures show you scanning a different one. Please refer to post 48 as well as 59 for settings to be used.

If you paste the following in your browser's address bar, you will get a screen shot which you can then save. Change the x.xx so that it matches your receiver's IP.

http://192.168.x.xx/grab?format=jpg

[bigcoops]

grab.jpeggrab.jpeggrab-1.jpeg

@Bigcoops, we need to esatblish your reception of the transponder used by ABM is correct. Your pictures show you scanning a different one. Please refer to post 48 as well as 59 for settings to be used.

If you paste the following in your browser's address bar, you will get a screen shot which you can then save. Change the x.xx so that it matches your receiver's IP.

http://192.168.x.xx/grab?format=jpg

Screenshots as requested

[abu baniaz]

Many thanks. OK, we now know for definite you cannot receiver that transponder. Until you fix your reception issue, please use Lraizer's Autobouquets E2. AB 28.2 uses any available transponder.

Please be aware that EPG data for 28.2 is downloaded from that transponder so you will have to resolve the reception issue.

[duoduo]

Hi Bigcoops, did you get to the bottom of your issue? I'm having the same issues with my zero can't scan ABM or crossepg...

[abu baniaz]

Hi Bigcoops, did you get to the bottom of your issue? I'm having the same issues with my zero can't scan ABM or crossepg...

See this thread, similar issue
http://www.world-of-satellite.com/sh...for-tuner-lock

[abu baniaz]

Forget that. He had a complete tuner failure.

[Flyingpig]

Just for help for anyone else having this issue --- I had the same issue on my friends setup, but when I connected the second LNB it worked okay.

Dont know whether this has any baring on the problem, but got the exact same message with just one LNB connected,,,,,