XPEED LX3 v3.44 bootloader

[Sicilian]

New v3.44 bootloader for XPEED LX3.

Changes:

- Boxtype wird im Display angezeigt
- Bootloaderversion wird im Display angezeigt
- Code vereinfacht

- Added boxtype in display after boot
- Added boot-loader version in display after boot
- Simplify code

Download from HERE

Flashing instructions: -

1) Format USB stick FAT32 - MAX 8GB RECOMMENDED.
2) Extract the zip file.
3) Copy 'xpeedlx3' file to root of USB stick.
4) Power off XPEED LX3.
5) Connect USB stick to a REAR USB port.
6) Power on, bootloader will automatically flash.
7) Power off, disconnected USB stick and power on ONLY WHEN ADVISED ON FRONT OLED DISPLAY!

[trixt]

New v3.44 bootloader for XPEED LX3.

Changes:

- Boxtype wird im Display angezeigt
- Bootloaderversion wird im Display angezeigt
- Code vereinfacht

- Added boxtype in display after boot
- Added boot-loader version in display after boot
- Simplify code

Download from HERE

Flashing instructions: -

1) Format USB stick FAT32 - MAX 8GB RECOMMENDED.
2) Extract the zip file.
3) Copy 'xpeedlx3' file to root of USB stick.
4) Power off XPEED LX3.
5) Connect USB stick to a REAR USB port.
6) Power on, bootloader will automatically flash.
7) Power off, disconnected USB stick and power on ONLY WHEN ADVISED ON FRONT OLED DISPLAY!

Hello

I have followed the above instructions exactly 100% but for some reason nothing happens? I have tried 4 different USB drives also.

When it boots up, the message "volume+ to update" appears. I therefore press the volume+ button but nothing happens whatsoever?

Please can you advise?

Thanks very much

[judge]

I therefore press the volume+ button but nothing happens whatsoever?

Are you pressing it on the box, not the remote?

[norhap]

have to press the front button ^

[trixt]

Solved. Had to press the UP key on the actual unit, NOT the remote!

[nicoj24]

or you can change the file inside the folder from noboot and rename it boot will do it automatically did on the lx 1 and lx 2 anyway.

[Sicilian]

Re-packaged the bootloader in the download centre, I wasn't zipped.

When extracted and copied to USB stick as instructed in 1st post, the bootloader should flash automatically as advised.