I have the vu solo 2 on vix 808 build my fan running about 1900rpm all day long and the temperature averages about 32c is that healthy? On standby my fan is off. (Usually over night) so in the mornin I've checked it and it's about 33-34c
I have the vu solo 2 on vix 808 build my fan running about 1900rpm all day long and the temperature averages about 32c is that healthy? On standby my fan is off. (Usually over night) so in the mornin I've checked it and it's about 33-34c
32c is perfectly fine, and nothing at all to worry about.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
That is even very low, so speed could go down .
If you use Fancontrol2 the speed will be regulated automatically.
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
Where can I find fancontrol2? Also is leàving the fan on 24hr advisable?
simbuffy (08-07-16)
Via the feeds.
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
i am on ZEUS Build 17 now and the temperature & fan speed are still not showing in Fan Control since build 11, mind you temp still shows on the image information page
one other question when in fan control what dose (standby Fan 1 PWM) do, is that a backup program in case Fan 1 PWM fails or is that for boxes with a option to fit a second fan inside
regards norm
VU+ DUO² (Triple S2 tuners) VIX, 750gb
TM-Nano 2 Super, 320gb
GigaBlue HD 800 UE Plus VIX
TM-Single VIX IT'S ALIVE
Octagon SF8 VIX (751MHz bootloader)
MARA M9
Harmony 700
DGS108 GBLAN, DIY NAS (8TB) XPEnology
1.1m dish, 0.1db Quad LNB, GTSAT DM14MG motor
80cm dish, 2x 0.1db LNB + 1x Quad 0.2db LNB, Disqec 4/1.
thanks for that marty i wondered what it was for so should i set the standby fan the same as 1 pwm or leave it as it is set currently with nothing showing on the bar
regards norm
No real point in it being on when in standby
VU+ DUO² (Triple S2 tuners) VIX, 750gb
TM-Nano 2 Super, 320gb
GigaBlue HD 800 UE Plus VIX
TM-Single VIX IT'S ALIVE
Octagon SF8 VIX (751MHz bootloader)
MARA M9
Harmony 700
DGS108 GBLAN, DIY NAS (8TB) XPEnology
1.1m dish, 0.1db Quad LNB, GTSAT DM14MG motor
80cm dish, 2x 0.1db LNB + 1x Quad 0.2db LNB, Disqec 4/1.
Actually when the box is in standby its still running at almost full pelt. Only the audio and video outputs have been disabled. Every thing else is still running. I always set my fan to a third for standby use.
Sent from my GT-I9300 using Tapatalk
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
Exactly. Let alone when the box is recording and or streaming.
For this I find Fancontrol2 an excellent solution: automated speed control, dictated by the actual temperature. No worries (but if you have them, you can see the temperature graph via a browser).
Help asked via PM will be ignored.
The forum is there for help and all will benefit from your questions.
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN, IN OPEN FORUM OR PM !
English is not my native tongue.
I apologise for all my grammar, spelling and idiom errors.
VU+ DUO² (Triple S2 tuners) VIX, 750gb
TM-Nano 2 Super, 320gb
GigaBlue HD 800 UE Plus VIX
TM-Single VIX IT'S ALIVE
Octagon SF8 VIX (751MHz bootloader)
MARA M9
Harmony 700
DGS108 GBLAN, DIY NAS (8TB) XPEnology
1.1m dish, 0.1db Quad LNB, GTSAT DM14MG motor
80cm dish, 2x 0.1db LNB + 1x Quad 0.2db LNB, Disqec 4/1.
Thank you for explaining that Rob & pheonix i have set the Standby fan to the same as Fan 1 PWM better safe than sorry as i sometimes have recordings set for when i am in bed
Rob, what settings do you recommend? (for the plugin)
VU+ DUO² (Triple S2 tuners) VIX, 750gb
TM-Nano 2 Super, 320gb
GigaBlue HD 800 UE Plus VIX
TM-Single VIX IT'S ALIVE
Octagon SF8 VIX (751MHz bootloader)
MARA M9
Harmony 700
DGS108 GBLAN, DIY NAS (8TB) XPEnology
1.1m dish, 0.1db Quad LNB, GTSAT DM14MG motor
80cm dish, 2x 0.1db LNB + 1x Quad 0.2db LNB, Disqec 4/1.