8/1 diseqc

[Sun City]

Hallo,
I have a 4/1 diseqc and i want more satellites,but in tuners configuration mode i cant see any other diseqc switch than 4/1.
I want to put 8/1 diseqc switch.So the tuner will automatically recognizes the 8/1 switch or i have to do something?
Or the only configuration is for 4/1 diseqc switch?
Thanks

[Sun City]

Ok
I found a video on tube that explains the how to.
Its a litle complicated to write all the procedure.with this video is very simple.

[abu baniaz]

Post a link so others can solve issue too.

[Sun City]

http://youtu.be/cdpIgKT4ijY
Here it is

[Darrellr]

I have a dish fitted with seven quad LNBs feeding four 8/1 switches. Configuration is very straightforward. If you get stick just post here and I'll help. Essentially I select the tuner, then select each of the seven satellite and config their matching lnb as Diseqc 1.1, uncommitted input.

e.g Tuner A -> Astra 2, LNB 1, DISECQ 1.1, uncommitted first, uncommitted command input 1; Astra 3B, LNB 2, DISECQ 1.1, Uncommitted first, Uncommitted command Input 2; etc