TM800 HD keeps dropping bbc3-4

[ranger4]

Recently installed a TM 800 Hd reciever which keeps dropping bbc3-4 channels so i retuned both transponder freq which brought back bbc4 but no bbc3 and now have lost bbc4 again, I understand both channels broadcast after 7pm, Is there currently an issue with broadcasts from thease and other fta channels, thanks.

[Stanman]

No little while back they moved transponders but should be fine now.

Might be an idea to update your satellite.xml file just in case

[ranger4]

Thanks Stanman, could you explain how to update sat xml file, I emailed technomate earlier and they gave quick reply saying to download image 9-11-11 then do factory reset and retune channels, Is it possible to download image 9-11-11 on to memory stick and update reciever software from mem stick or would i have to connect reciever direct to pc to update software, thanks.

[Stanman]

You can stick the image on USB and flash it that way but you will lose EVERYTHING bar any recordings - so back up your config files.

Who is that image by as if its TM than dont bother.


You download the satellite.xml from here - you need to tick the sats you want.

http://satellites-xml.eu/

IIRC I think on the TM800 its VAR/ETC but perhaps someone with it can tell you exact location.

[Rob van der Does]

I would use the great Huevos's site for the xml

http://satellites-xml.org/

[Larry-G]

I would use the great Huevos's site for the xml

http://satellites-xml.org/

Agreed as unlike others it allows you to tailor your satellites.xml file to include only active transponders if you wish. This is very beneficial as any scans made with such a file will not have to pause over dead or inactive transponders while trying to get a lock, drastically spending up scan times while still pulling in the same number of channels.


Sent from my iPad using Tapatalk HD