How to set Default Bootmodes in Golden Media CR 990 HD LX [Spark]

[silverfox0786]

• switch default booting system between SPARK and Enigma2

Enigma 2 Mode:

1. Turn off receiver
2. Connect the USB stick ready to receiver
2. On Frontpanelu hold [OK] and then turn the power switch
3. After about 5 seconds, the display should appear in the display [FORCE] then you should release the [OK] and press [P -]
4. Once you see [EN16] press [OK] and allow to boot


Spark Mode:

1. Turn off receiver
2. Connect the USB stick ready to receiver
2. On Frontpanelu hold [OK] and then turn the power switch
3. After about 5 seconds, the display should appear in the display [FORCE] then you should release the [OK] and press [P +]
4. Once you see [SPAR] press [OK] and allow to boot