Hello Guest, if you are reading this it means you have not registered yet. Please take a second, Click here to register, and in a few simple steps you will be able to enjoy our community and use our OpenViX support section.
Page 6 of 6 FirstFirst ... 456
Results 76 to 86 of 86

Thread: Cant find channels,sky news, aj jazeera sports

  1. #76

    Title
    ViX Beta Tester
    Donated Member
    Join Date
    Dec 2010
    Posts
    2,708
    Thanks
    3,077
    Thanked 978 Times in 598 Posts
    Hi tolmie,

    I have never used diseqc switches but perhaps try this if possible to rule out a faulty sat box.

    If you could connect the box to one of the LNB's directly bypassing the diseqc switch. Then set up the Solo so that it's tuner configuration is Simple-->Single-->(28.2 or 13) and download settings for just the satellite you have selected.

    This way you can rule out any setup issues as it is completely straight forward. If you can't get a channel to clear this way then perhaps you have a dud Solo. If BBC FTA clears then it's back to how you have setup the diseqc in your settings.

    If this is too messy with your setup call to a mate that has a Sly setup and connect to their dish with the setup above. If you cannot get the FTA channels to clear then return the Solo..

    Cheers,
    mcquaim

  2. #77

    Title
    ViX Beta Tester
    Donated Member
    Join Date
    Dec 2010
    Posts
    2,708
    Thanks
    3,077
    Thanked 978 Times in 598 Posts
    Just one more thing, are you sure that your diseqc is a 4 input switch?

    I see from the screenshot of your tuner setup that you have diseqc A/B/C/D. If the switch only had two inputs then you would need to select diseqc A/B instead.

    Perhaps check the fortec and look for a menu for the tuner configuration and see what it has stated.. It might save you changing cables etc. as I suggested above...

  3. #78

    Title
    Senior Member
    Join Date
    Jan 2012
    Posts
    147
    Thanks
    6
    Thanked 3 Times in 2 Posts
    its def a quad setup.

  4. #79

    Title
    Senior Member
    Join Date
    Jan 2012
    Posts
    147
    Thanks
    6
    Thanked 3 Times in 2 Posts
    See if it was wrong surely I wouldnt find any channels, instead of find like over 700 services.

  5. #80

    Title
    ViX Beta Tester
    Donated Member
    Join Date
    Dec 2010
    Posts
    2,708
    Thanks
    3,077
    Thanked 978 Times in 598 Posts
    Fair enough, if you are happy that is correct then.. Perhaps try this ten and at least you will confirm that the sat box is ok then...

    Quote Originally Posted by mcquaim View Post
    Hi tolmie,

    I have never used diseqc switches but perhaps try this if possible to rule out a faulty sat box.

    If you could connect the box to one of the LNB's directly bypassing the diseqc switch. Then set up the Solo so that it's tuner configuration is Simple-->Single-->(28.2 or 13) and download settings for just the satellite you have selected.

    This way you can rule out any setup issues as it is completely straight forward. If you can't get a channel to clear this way then perhaps you have a dud Solo. If BBC FTA clears then it's back to how you have setup the diseqc in your settings.

    If this is too messy with your setup call to a mate that has a Sly setup and connect to their dish with the setup above. If you cannot get the FTA channels to clear then return the Solo..

    Cheers,
    mcquaim

  6. #81
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,649
    Thanks
    23,585
    Thanked 26,054 Times in 7,638 Posts
    Quote Originally Posted by tolmie View Post
    It made absolutly no diff, still missing loads of channels, updated satelites files and channel thing, pick bbc 4, bbc news, bbc 1 scotland and says tuner failed, basically any channel I pick that wasnt found in the scan will say tuner failed, begginging to think its a duff machine and need a new one.
    Theres something wrong with your setup

    Run a direct feed from your 28.2 dish and test that way.

    Could even be that the Solo dont like your diseqc switch for some reason. The only way your going to rule out the receiver is to run a direct feed from the 28.2 dish to the receiver. Doing that will save waste time, packaging and costs returning a receiver unnessacarily. I've used a number of Solo's and never had a single issue.

    Also try these diseqc settings: -

    Configuration Mode simple
    Mode diseqc A/B/C/D
    Leave ports as they are provided you are 100% they are correct.
    Set voltage and 22khz swith to YES
    Send diseqc leave set try setting to both yes and no.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  7. The Following User Says Thank You to Sicilian For This Useful Post:

    mcquaim (12-01-12)

  8. #82

    Title
    Senior Member
    Join Date
    Jan 2012
    Posts
    147
    Thanks
    6
    Thanked 3 Times in 2 Posts
    ok folks, will try suggested, got feeling it maybe switch issue myself, you guys will def be getting a donation for all this help.

  9. The Following User Says Thank You to tolmie For This Useful Post:

    mcquaim (12-01-12)

  10. #83
    Sicilian's Avatar
    Title
    The Boss
    Join Date
    Mar 2010
    Posts
    29,649
    Thanks
    23,585
    Thanked 26,054 Times in 7,638 Posts
    Quote Originally Posted by tolmie View Post
    ok folks, will try suggested, got feeling it maybe switch issue myself, you guys will def be getting a donation for all this help.
    Another thing to check is the LNB, it could be slightly out, not affecting the Fortec, but affecting the Solo, but start with the switch settings, then run a direct feed.
    D I S C L A I M E R

    My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!

    Please help keep OpenViX online, donate HERE.
    Rules can be found
    HERE
    Support our sponsor World-Of-Satellite
    HERE
    GIGABLUE UHD QUAD 4K, VU+ DUO 4K SE, ZGEMMA H7S, VU+ UNO 4K SE
    Triax 1.1m Powered by TM2600, Fixed 28.2 Zone 2 dish with GT-SAT Unicable





  11. #84

    Title
    Senior Member
    Join Date
    Jan 2012
    Posts
    147
    Thanks
    6
    Thanked 3 Times in 2 Posts
    ok guys, praise the lord, had to change Set voltage and 22khz swith to YES and now working a dream, thank you to everyone of you who helped along,fantastic.

  12. #85
    Larry-G's Avatar
    Title
    V.I.P
    Donated Member
    Join Date
    May 2010
    Posts
    32,542
    Thanks
    7,824
    Thanked 22,935 Times in 12,378 Posts
    Quote Originally Posted by tolmie View Post
    ok guys, praise the lord, had to change Set voltage and 22khz swith to YES and now working a dream, thank you to everyone of you who helped along,fantastic.
    Well it took a while but i'm well chuffed you got there in the end.
    My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.

    If you don't like what I post, Don't read it.

    SIMPLES.

  13. #86

    Title
    ViX Beta Tester
    Donated Member
    Join Date
    Dec 2010
    Posts
    2,708
    Thanks
    3,077
    Thanked 978 Times in 598 Posts
    Hurrah, good stuff tolmie

    Sit back and enjoy now!

Page 6 of 6 FirstFirst ... 456

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.