OK, I got a really strange problem.
On scrambled channels using subscriber card using either CCcam or Oscam CAMs the card re-inits approx every 6 minutes. FTA channels are fine.
OK, I got a really strange problem.
On scrambled channels using subscriber card using either CCcam or Oscam CAMs the card re-inits approx every 6 minutes. FTA channels are fine.
The softcam manager is set to check by default every 6 minutes if the cam is running and if not re-start it. i'd say yours is incorrectly thinking the cam is not running and re-starting. you can change the timer on this check or disable it all together if you want to.
sorry but i'm not near my box as i'm at work so forgive me if i cant remember the menu layout but while in the softcam manager try pressing the menu button see if you have a option there to disable the check.
My posts contain my own personal thoughts and opinions, they do not represent those of any organisation or group but my own.
If you don't like what I post, Don't read it.
SIMPLES.
romcard (21-12-11)
You are correct, I just went into Softcam manager just now, pressed menu and disabled Autocheck as it was set for yes and a 6 minute delay. There was also a log saying cam check, cam not running, restarting cam. Hopefully that is it sorted. As I say it was doing it with both CCCam and Oscam.
Xtrend ET5000
Larry-G (21-12-11)
romcard (21-12-11)
Yes, that appears to have fixed it, card not resetting now.
Xtrend ET5000
IIRC correctly you need to enable telnetinfo in CCcam as the checker uses that to see if the cam is running or not.
Support The Sponsor - Buy from the best HERE
Please abide by the rules - have a read HERE
VIX manual & guides >>HERE
Download images from >> HERE
New Box Setup Guide >>HERE
D I S C L A I M E R
My right to post information is protected under the rights for freedom act. In all instances, information discussed here on my posts are either hypothetical in nature, out of general curiosity, common knowledge, public knowledge, or role-play. Any use of the collective descriptions and shared knowledge from any of my posts are at the sole discretion of the reader. I am not responsible for what you do with it!
PM HELP WILL BE IGNORED PLEASE POST HERE IN FORUM AS IT BENEFITS EVERYONE
Follow us on Twitter
NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN! IN OPEN FORUM OR PM
IF THE POSTS HELP PLEASE CLICK THANKS OR ADD TO REP ?
OK so for CCcam I would need to add the line ALLOW TELNETINFO: yes
That doesn't help with Oscam, are there checks for that CAM ?
Xtrend ET5000