new bootloader 30.11.2011 instalation problem ?

[jonc]

you sure you not got a dodgy box and can the retailer you got it from confirm its not a clone

am having the same problem and my box is not a cone I got it from the sponsor a few months ago

[drspiros]

I think that when you want to flash the bootloader, as soon as the yellow led shines, you must push the down arrow button, not the upper one. Try this.

[Stanman]

You don't need to press the down arrow to flash the BL its the same as the image, make sure just the ET5K file is on the root of the USB and the process takes a matter of seconds.

When I did it on the ET5K, I repeated it twice as I thought it had not done it. Do not expect the same flash time as an image. As long as you get the flashing icons from the link silverfox posted than its very likely BL has flashed.

[martinakis]

you sure you not got a dodgy box and can the retailer you got it from confirm its not a clone

I think that my box is not clone.I buy my reciver from my friend,you have sat shop.

[silverfox0786]

I think that my box is not clone.I buy my reciver from my friend,you have sat shop.

only reason i ask is the BL should flash without issues

in that case i can only say yr not following the procedure properly

[Sicilian]

Are you guys sure you haven't already flashed the bootloader?

Try flashing ViX 2.3 with the folder named as et5x00

[martinakis]

Are you guys sure you haven't already flashed the bootloader?

Try flashing ViX 2.3 with the folder named as et5x00

Can you have a problem if I do not install new bootloader ?

[Stanman]

Should not do, image will just not flash. I did it on the ET9K and ET5K.

[martinakis]

Should not do, image will just not flash. I did it on the ET9K and ET5K.

The image is installed without problem.May be I update new bootloader and I do not undertsnad.

[jonc]

my box came pre-flashed with a bootloader on it 2.6.31

[Stanman]

The image is installed without problem.May be I update new bootloader and I do not undertsnad.

If on boot up it says 9x000 you are on the new bootloader, job done

[Stanman]

my box came pre-flashed with a bootloader on it 2.6.31

Who did you buy from, if forum sponsor and it has vix 2.3 than its on the new bootloader

[jonc]

The sponsor but it doesn't have vix 2.3 on it

[silverfox0786]

The sponsor but it doesn't have vix 2.3 on it

did you buy it before or after the release of vix 2.3 if after it will defo have new loader

or if you requested pli image then it will have new bootloader on it

[Stanman]

The sponsor but it doesn't have vix 2.3 on it

If you want VIX 2.3, than you need to update the bootloader before hand.

Follow the instructions in Sic post above and afterwards flash with 2.3