By remote control
By remote control
abu baniaz (25-06-18)
Can you attach your settings file please? It will be in /etc/enigma2 You will need to zip before you can attach it.
Can you also check that the setup mode is the default (expert)?
Menu > Setup > System > Customise
Just for reference purposes, the change was was here.
https://github.com/OpenViX/enigma2/c...65d0bbb2c8cf9f
Setup mode is expert. I could not understand that why you need my settings?
Is it bug or not, any opinion?
The commit/change is that if tuners are not configured, those two menus will not show. It is not a bug as far as we know. Nobody else has reported the issue.
You said your tuners were configured/set correctly, that file you posted showed otherwise. However, it is a trimmed version of your settings file.
Maybe you should flash image again, do not restore anything after flashing, set your tuners and then try again?
Maybe the other users havent yet updated or not recognized. I control updates every time and update when you publish it. So the others may not recognize this problem. Could you check what you checked in the latest change. By the way i am software developer for 15 years. So i understand you but i advice check the code again one more time. Thanks.
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
You will just have to bite the bullet and reflash with latest ViX image and do as Abu says, setup from scratch with no restores of your backup/plugins.
Sent from my iPhone using Tapatalk
Vu+ Ultimo 4K with 3TB HDD, Dual FBC (Sat) tuners, 1x Twin Hybrid DVB-C/T/T2 tuner
Vu+ Solo 4K with 1TB HDD, Dual FBC (Sat) tuners, 1x Hybrid DVB-C/T/T2 tuner
Vu+ Solo 2 with 1TB HDD 'White Edition', 2x DVB-S2 tuners
Mut@nt HD2400 with 1TB HDD, 4x DVB-S2 tuners
Fixed 28.2E Technomate 65cm Mesh Satellite Dish with Inverto Unicable II/JESS LNB and Inverto Unicable Splitter
Fixed 28.2E Sky Zone 1 45cm Satellite Dish with Octo LNB
(All receivers installed with the latest Dev build)
…. even easier if you do an image backup first, then you can do as asked and then go back to your original image if you want/need to.
abu baniaz (25-06-18)
ok i understood you but in previous version i did not have a problem like that, so i believe that this is a problem of last commit. After reflash my image if the problem continues, what will you advice or do?
To fix a problem, you have to be able to reproduce it/know cause. As far as we know it is working fine. Commit is from PLi, nobody has reported issue there either.
I am on 5.1 030 003. I also flashed 5.1 029 to test your report. I could not reproduce the issue you are having.
Sent from my Moto G (5S) using Forum Fiend v1.3.3.
After reflash my image if the problem continues, what will you advice or do?
Will come round for tea and see issue myself.
Please create an image backup so you can restore it if necessary. Flash new image, do not restore anything or install any plugins. Just set tuners and check menus.
Sent from my Moto G (5S) using Forum Fiend v1.3.3.
I have flashed 5.1.029 and not restore or install anything but my problem continues. Menus not visible.
Tuner 1 is set and only Port D is set, the others not connnected and tuner 2 is disabled.
As you are not willing to upload your settings file, I am out of ideas.
Here is mine
Sent from my Moto G (5S) using Forum Fiend v1.3.3.
Last edited by abu baniaz; 25-06-18 at 19:59.
i have attached settings (after flashing new image)settings.rar
i have also attached latest tuner config screen shots. any opinion?
IMG_4353.jpg
IMG_4354.jpg
IMG_4355.jpg