... and 21:40:03.3407 {BackupManager] Backup failed - e. g. wrong backup destination or no space left on backup device
So also might be worth checking both space and that HDD is the device you are expecting it to be!
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
Yes but shouldn't crash. Crash is this:
Hopefully fixed with this:Code:21:40:03.3407 {BackupManager] Backup failed - e. g. wrong backup destination or no space left on backup device 21:40:13.3968 [MessageBox] Timeout! 21:40:13.4205 Traceback (most recent call last): 21:40:13.4211 File "/usr/lib/enigma2/python/StartEnigma.py", line 224, in processDelay 21:40:13.4299 callback(*retval) 21:40:13.4311 TypeError: BackupFiles.BackupComplete() takes 1 positional argument but 2 were given
https://github.com/OpenViX/vix-core/...e06b31c7564d3f
nekrub2 (23-09-22)
Hi Huevos
On your link I see src/BackupManager.py
Where would I have to copy this file in and would I need a reboot afterwards?
VU+ Solo2
USB 32GB used as HDD
Diseq 13.0E 19.0E
\Root\usr\lib\enigma2\python\Plugins\SystemPlugins \ViX\
The USB is not write protect. I just made a new backup through the Backup Manager. It says under device: /media/hdd/
So it can't be completely write protect. I only can assume that some files for the cover pictures or the lyrics were by any reason write protected. The best is to remove the USB from my sat box, put it into my laptop and explore it under Linux Mint 21.
VU+ Solo2
USB 32GB used as HDD
Diseq 13.0E 19.0E
I noticed that some recordings had failed last night due to /media/hdd not being writeable. Mount Manager showed that the drive was marked as read only.
I did a full reboot and the drive won't mount at all now. I haven't had chance to investigate further yet. OpenViX 6.2.010 (2022-09-05) dev build on a GigaBlue UHD UE 4K.
My logs are set to save to hdd but I noticed there is a crash log in /home/root/.
Enigma2_crash_2022-09-21_06-51-43.log
I think it is probably generated because I have no hdd rather than showing why it was set to R/O
Willo
#######################
AX HD61 4K UHD Twin (test box)
Vu+ Uno 4K SE
Edision OS Mio 4K
Zgemma H9 Twin
Vu+ Zero 4K
Vu+ Uno 4K
GT-Sat GT-S3DCSS24 Unicable II LNB
GT-Sat GT-dLNB1-DY Unicable II LNB
#######################
Dmsg shows error:
3.419268] scsi 2:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
<5>[ 3.428685] sd 2:0:0:0: Attached scsi generic sg0 type 0
<5>[ 3.434637] sd 2:0:0:0: [sda] 240353280 512-byte logical blocks: (123 GB/115 GiB)
<5>[ 3.447080] sd 2:0:0:0: [sda] Write Protect is on
<7>[ 3.451834] sd 2:0:0:0: [sda] Mode Sense: 43 00 80 00
<5>[ 3.459208] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 3.498232] sda: sda1
<5>[ 3.502689] sd 2:0:0:0: [sda] Attached SCSI removable disk
<5>[ 3.556820] random: nonblocking pool is initialized
<6>[ 3.871703] EXT4-fs (mmcblk0p5): re-mounted. Opts: nodelalloc,data=journal
<6>[ 4.167945] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
<3>[ 4.174878] EXT4-fs (sda1): write access unavailable, cannot proceed
<3>[ 4.194909] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (2c0)
<3>[ 4.206148] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (2c4)
<4>[ 4.221346] UDF-fs: warning (device sda1): udf_fill_super: No partition found (2)
Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> GT-Sat unicable LNB to 1.5M dish(28.2E)
------------------> Gigablue unicable LNB to 80 cm dish(19.2E)
.......................> FBC & DVB-S2X into 90cm dish (27.5W) Opticum robust Unicable LNB
AX HD61, Edision Osmio 4K+, Zgemma H9Combo, Octagon SF8008 , gbtrio4k, h9se using unicable ports
Zgemma H9 C/S into Giga4K
I'll try another hdd later on. I added my post to this thread because nekrub2's hdd had suddenly become R/O as well. Just wondered if it was related.
Willo
#######################
AX HD61 4K UHD Twin (test box)
Vu+ Uno 4K SE
Edision OS Mio 4K
Zgemma H9 Twin
Vu+ Zero 4K
Vu+ Uno 4K
GT-Sat GT-S3DCSS24 Unicable II LNB
GT-Sat GT-dLNB1-DY Unicable II LNB
#######################
I removed the USB HDD and plugged it into my laptop on the windows 7 partition. Indeed the directory mp3browser and its underlying sub-directories cache and db had the read only attribute. so I set them to read and write and attached the stick back to the box. When trying to update the MP3Browser database the box crashed again. This time I could read one error, saying
FAT-fs (sda1): error, fat_free_clusters: deleting FAT entry beyond EOF.
FAT-fs (sda1): Filesystem has been set read-only.
Could it be that I have a buggy stick and as soon as openvix detects this it sets it read-only?
I attach the crash log.
VU+ Solo2
USB 32GB used as HDD
Diseq 13.0E 19.0E
nekrub2 (23-09-22)
Dear all
I could fix my problem. 1. I made a chkdsk under windows (after copying the whole content on the HD). With this a big part of the problem was solved. When trying to import again it crashed again but this time I could read out that it had something to do with the character sets (windows versus UTF-8). And indeed, under Linux I could see file names that were broken because they had special characters in, which are different in the two system. After manual editing the files over ftp I did a now mp3browser update and it worked. 127 songs were imported.
Just for your information I attach the crash log related to the file names.
nekrub2
VU+ Solo2
USB 32GB used as HDD
Diseq 13.0E 19.0E
twol (24-09-22)